Now showing items 22-39 of 39

    • Milled groove square shape conformal cooling channels in injection molding process 

      Shayfull Zamree, Abd. Rahim; Safian bin Sharif, Prof. Dr.; Azlan, Mohd Zain, Dr.; Rozaimi, Mohd. Saad; Ahmad Fairuz, Mansor (Taylor and Francis Group, LLC., 2013-08)
      In designing molds for injection molding process, it is very difficult to achieve efficient cooling with uniform thermal distribution. To overcome these issues, the uses of conformal cooling channels with the uniform ...
    • A new invention of alarm reminder locking (ARL) security system 

      Mohd Effendi, Muhammad Suandi; Shayfull Zamree, Abd Rahim; Mohd Sazli, Saad; Mohd Nasir, Mat Saad; Badrul Azmi, Abdul Holed (Engg Journals Publications, 2016-02-01)
      Alarm Reminder Locking (ARL) Security System mainly focuses on a door security system, which can install in the door area to increase the security level for home, office room, hostel or other places. This system used Arduino ...
    • Optimal process conditions of warpage with thin-shallow features molded with pin-point gating system 

      Mohd Fathullah, Ghazli@Ghazali; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib; Mohd Nasir, Mat Saad; Muhamad Saifuldin, Abdul Manan (Praise Worthy Prize, 2011-11)
      Thin shallow plastic parts are widely produced using injection molding processes in producing varieties of components and applications. Warpage issue always happens in manufacturing thin shallow parts due to its uneven ...
    • Optimisation of Shrinkage and Strength on Thick Plate Part Using Recycled LDPE Materials 

      Norshahira, Roslan; Shayfull Zamree, Abd Rahim; Abdellah El-hadj, Abdellah; Mohd Mustafa Al Bakri, Abdullah; Błoch, Katarzyna; Pietrusiewicz, Paweł; Nabiałek, Marcin; Szmidla, Janusz; Kwiatkowski, Dariusz; Correia Vasco, Joel Oliveira; Mohd Nasir, Mat Saad; Mohd Fathullah, Ghazali (MDPI AG, 2021-04-05)
      Achieving good quality of products from plastic injection moulding processes is very challenging, since the process comprises many affecting parameters. Common defects such as warpage are hard to avoid, and the defective ...
    • Optimization of tile laying process parameters using taguchi's method 

      Norshah Afizi, Shuaib; Shayfull, Zamree Abd Rahim; Mohd. Fathullah, Ghazli @ Ghazali; Mohamad Ezral, Baharudin; Zaidi, Mohd Ripin (Praise Worthy Prize, 2011-11)
      This paper discusses the use of the Taguchi method of experimental design in optimizing process parameters of adhesion strength between tile and mortar bed. The effects of four process parameters of force, thinset mortar ...
    • Optimization on parameter settings in determining warpage factors of a side-gated thin shallow part injection molding for PP, ABS & PC+ABS materials 

      Norshah Afizi, Shuaib; Muhamad Nasir, Murad; Mohd. Fathullah, Ghazli @ Ghazali; Shayfull Zamree, Abd Rahim; Muhammad Syahril, Bahari (Praise Worthy Prize S.r.l., 2012-05)
      The injection molding process of thin shallow part requires several concerns in order to produce a quality output. In part of determining the best parameter settings, among other considerations that need to be taken are ...
    • Potential of conformal cooling channels in rapid heat cycle molding: a review 

      Shayfull Zamree, Abd Rahim; Safian, Sharif; Azlan, Mohd Zain; Rozaimi, Mohd Saad; Mohd Fathullah, Ghazli@ Ghazali (Wiley Periodicals, Inc., 2014)
      Rapid heat cycle molding (RHCM) can eliminate the weld line, increase flow length, and improve surface quality of the molded parts. However, the cycle time is much longer as compared to the conventional injection-molding ...
    • Shrinkage analysis on thick plate part using Response Surface Methodology (RSM) 

      M. Isafiq; Shayful Zamree, Abd Rahim; ‪Mohd Nasir, Mat Saad; M., M. Rashidi; Mohd Fathullah, Ghazli @ Ghazali; Nik Noriman, Zulkepli (EDP Sciences, 2016)
      The work reported herein is about an analysis on the quality (shrinkage) on a thick plate part using Response Surface Methodology (RSM). Previous researches showed that the most influential factor affecting the shrinkage ...
    • Strength of the weld line and warpage defects on the molded parts in injection molding process 

      S. M., Nasir; Khairul Azwan, Ismail, Dr.; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib (Praise Worthy Prize S.r.l., 2013)
      Strength at weld the line location and warpage problem in injection molding plastic component were not new problems in injection molding industries. Many researchers had emerged with several improvement techniques to reduce ...
    • A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue 

      Mohd. Fathullah, Ghazli @ Ghazali; Shayfull Zamree, Abd. Rahim; Sharif, S.,; Norshah Afizi, Shuaib; Mohd. Nasir, Mat Saad (Praise Worthy Prize, 2011-11)
      The demand of ultra thin plastic parts in global industries is increasing today. Ultra thin plastic parts are widely produced using injection molding processes and it is understood that warpage issue is regularly found in ...
    • Tool wear and surface evaluation in drilling fly ash geopolymer using HSS, HSS-Co, and HSS-TiN cutting tools 

      Mohd Fathullah, Ghazali; Mohd Mustafa Al Bakri, Abdullah; Shayfull Zamree, Abd Rahim; Gondro, Joanna; Pietrusiewicz, Paweł; Garus, Sebastian; Stachowiak, Tomasz; Victor Sandu, Andrei; Muhammad Faheem, Mohd Tahir; Erdi Korkmaz, Mehmet; Mohamed Syazwan, Osman (MDPI AG, 2021-03-26)
      This paper reports on the potential use of geopolymer in the drilling process, with respect to tool wear and surface roughness. The objectives of this research are to analyze the tool life of three different economy-grade ...
    • Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS 

      Shayfull Zamree, Abd Rahim; Mohd. Fathullah, Ghazli @ Ghazali; Mohd. Nasir, Mat Saad; Norshah Afizi, Shuaib; Muhamad Saifuldin, Abdul Manan, Dr. (Praise Worthy Prize S.r.l., 2012)
      Warpage is a common issue in plastic injection molding process. It can get worse for thin parts and therefore it is more challenging for product design engineers, mold designers and manufacturing engineer to cope with ...
    • Warpage analysis between straight and conformal cooling channels on thin shallow shell 

      Norshah Afizi, Shuaib; Mohd Fathullah, Ghazli@Ghazali; Shayfull Zamree, Abd. Rahim; Mohd Nasir, Mat Saad; Mohd Fidzwan, Md Amin Hamzas (Trans Tech Publications, 2014)
      Warpage is a type mold defect due to non-uniform temperature variation which causes differential shrinkage rate on the moulded parts. An accurate warpage prediction is so important in helping mould designers to achieve ...
    • Warpage analysis with straight drilled and conformal cooling channels on front panel housing by using taguchi method 

      Shayfull Zamree, Abd Rahim; Safian, Sharif, Prof. Dr.; Azlan, Mohd Zain, Dr.; Rozaimi, Mohd Saad; Ahmad Fairuz, Mansor (Trans Tech Publications, 2014)
      The challenging in injection molding process is to get the uniform thermal distribution on the molded parts during the cooling stage which is mainly depend on the design of the cooling channels in injection mold. Poor ...
    • Warpage Optimisation on the Moulded Part using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO) 

      Mohd Hazwan, Mohd Hanid‬; Shayfull Zamree, Abd Rahim; S., Sharif; S. M., Nasir; M. M., Rashidi (EDP Sciences, 2017)
      Nowadays, there are various of optimisation methods that have been explored by many researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it was ...
    • Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO) 

      Mohd Hazwan, Mohd Hanid‬; Shayfull Zamree, Abd Rahim; S., Sharif; S. M., Nasir; M. M., Rashidi (EDP Sciences, 2017)
      Today, there are many of optimisation method have been explored by previous researchers to find the appropriate processing parameters setting for the injection moulding process. From the previous researches, it has been ...
    • Warpage optimisation using Recycled Polycar-bonates (PC) on Front Panel Housing 

      Nur Aisyah Miza, Ahmad Tamizi; Abdellah El-hadj, Abdellah; Mohd Mustafa Al Bakri, Abdullah; Nabiałek, Marcin; J. Wysłocki, Jerzy; Jeż, Bartłomiej; Palutkiewicz, Paweł; Rozyanty, Abdul Rahman; Mohd Nasir, Mat Saad; Mohd Fathullah, Ghazli (MDPI AG, 2021-03-15)
      Many studies have been done using recycled waste materials to minimise environmental problems. It is a great opportunity to explore mechanical recycling and the use of recycled and virgin blend as a material to produce new ...
    • Warpage optimization on ultra thin plate in three plate mold for PP, ABS & ABS+PC materials by using Taguchi method 

      Mohd. Nasir, Mat Saad; Norshah Afizi, Shuaib; Shayfull Zamree, Abd. Rahim; Mohd. Fathullah, Ghazli @ Ghazali; Nooraizedfiza, Zainon (Praise Worthy Prize S.r.l., 2012-03)
      The parameters setting of process conditions in injection molding process is very importance to ensure the quality of molded components is controlled by minimizing of any defects such as warpage. Various injection parameters ...