Now showing items 7-26 of 39

    • Comparison between single and multi gates for minimization of warpage using taguchi method in injection molding process for ABS material 

      Mohd. Nasir, Mat Saad; Khairul Azwan, Ismail; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib (Trans Tech Publications, 2013-12)
      In this study, a mold is designed in single and dual type of gate in order to investigate the deflection of warpage for thick component in injection molding process. Autodesk Moldflow Insight software was used as a medium ...
    • Design of a portable paddy cleaning machine 

      Shayfull Zamree, Abd. Rahim; Mohd Fathullah, Ghazli@Ghazali; Mohd Azaman, Md Deros (2010-09-20)
      Portable Paddy Cleaning Machine is designed to remove foreign materials and impurities such as sand particles, stones, paddy straws and foreign seeds from paddy. This machine provides farmers an alternative replacement of ...
    • Dimensional accuracy and surface roughness analysis for AlSi10Mg produced by Selective Laser Melting (SLM) 

      K., Kamarudin; M.S., Wahab; Shayful Zamree, Abd Rahim; Aqeel, Ahmed; A.A., Raus (EDP Sciences, 2016)
      Selective Laser Melting (SLM) is an Additive Manufacturing (AM) technique that built 3D part in a layer-by-layer method by melting the top surface layer of a powder bed with a high intensity laser according to sliced 3D ...
    • The effect of inoculation on properties of modified ductile Ni-resist alloy 

      Mohd Rashidi, Maarof; Mohd Hasbullah, Idris; Shayfull Zamree, Abd Rahim (Trans Tech Publications, 2014)
      In this study, ductile Ni-resist alloy with a minimum 18 wt. % nickel composition was modified. Up to 12 wt. % manganese was added together with 10 wt. % nickel before undergoing the inoculation process at various percentages ...
    • Effect on Mechanical Properties of Heat Treated High Manganese Austenitic Cast Iron 

      A.K., Muzafar; M., M. Rashidi; I., Mahadzir; Shayful Zamree, Abd Rahim (EDP Sciences, 2016)
      This work presents an attempt to study the effect of manganese addition and heat treatment on higher carbon austenitic cast iron to form high manganese austenitic cast iron with reduced nickel content (Mn-Ni-resist) on ...
    • Fire alarm system, portable fire extinguisher and hose real system maintenances for safety purpose and requirements 

      Azmi, Harun; Norshah Afizi, Shuaib; Mohd. Fathullah, Ghazli @ Ghazali; Shayfull Zamree, Abd Rahim; M.Z.M., Zain (Universiti Malaysia Perlis (UniMAP), 2009-12-01)
      Fire Fighting system or equipments are important elements in building safety measures in order to ensure people’s safety when fire occurs. The Fire Alarm Systems deserves the highest level of care and maintenance achievable. ...
    • Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process 

      Shayfull Zamree, Abd Rahim; Safian, Sharif; Azlan, Mohd Zain; Mohd Nasir, Mat Saad; Rozaimi, Mohd Saad (John Wiley and Sons Inc., 2015)
      In materials processing, quality and productivity are notably important and must be controlled for each product type produced. In the injection molding process, quality is measured as the extent of warpage of molded parts ...
    • Improving warpage on thin shallow parts in two-plate moulds with conformal cooling channels 

      Shayfull Zamree, Abd. Rahim; Muhammad Syahril, Bahari; Siti Aishah, Adam; Mohd. Nasir, Mat Saad; Nooraizedfiza, Zainon (Praise Worthy Prize S.r.l., 2013-03)
      Nowadays, the trend of consumer products designed is getting smaller and most of cover is made from plastic which was produced by using injection molding process. Thus, the demand of thin shallow plastic parts in global ...
    • Improving warpage with milled groove square shape conformal cooling channels 

      Shayfull Zamree, Abd Rahim, Dr.; Safian, Sharif; Azlan Mohd, Zain; Mohd Nasir, Mat Saad; Rozaimi, Mohd Saad (Trans Tech Publications Ltd, 2016)
      Warpage is a common issue in an injection moulding process due to non-uniform temperature variation causing differential shrinkage on the moulded parts. In designing moulds for injection molding process, it is very difficult ...
    • The influence of different mold temperature on warpage in a thin shallow injection molding process 

      Norshah Afizi, Shuaib; Muhamad Nasir, Murad; Mohd. Fathullah, Ghazli @ Ghazali; Shayfull Zamree, Abd Rahim; Muhamad Saifuldin, Abdul Manan, Dr. (Praise Worthy Prize S.r.l., 2012)
      Every injection molding parameter have its own influence towards the quality of an injection-molded part. Temperature, pressure and time are main parameters that typically highlighted in controlling the warpage defect of ...
    • The influence of Rice Husk Fiber on The Properties of Epoxidized Natural Rubber/Rice Husk Compounds 

      Dahham, Omar S.; Nik Noriman, Zulkepli; Sam, Sung Ting; Marwa, Al-Samarrai N.; Shayfull Zamree, Abd Rahim; Alakrach, A.M; Abduati, Elnaid S. A. (EDP Sciences, 2016)
      In this work, curing characteristics, tensile and physical properties of epoxidized natural rubber/ rice husk (ENR-50/RH) compounds were investigated. Different RH loading (10, 20, 30, 40 and 50 Phr) and size (fine size ...
    • The Influence of Selective Laser Melting Parameters on Density and Mechanical Properties of AlSi10Mg 

      A. A., Raus; M. S., Wahab; Shayful Zamree, Abd Rahim; K., Kamarudin; M., Ibrahim (EDP Sciences, 2016)
      Selective Laser Melting (SLM) is one of the most effective powder bed technique in the additive Manufacturing (AM) which able to fabricate functional metal parts directly from 3D Computer Aided Design (CAD) file data. In ...
    • Investigation on microstructure of heat treated high manganese austenitic cast iron 

      A.K., Muzafar; M.M., Rashidi; I., Mahadzir; Shayful Zamree, Abd Rahim (EDP Sciences, 2016)
      The effect of manganese addition and annealing heat treatment on microstructure of austenitic cast irons with high manganese content (Mn-Ni-resist) were investigated. The complex relationship between the development of the ...
    • Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron 

      A.K., Muzafar; M. M., Rashidi; I., Mahadzir; Shayfull Zamree, Abd Rahim (EDP Sciences, 2016)
      The effect of manganese addition and annealing heat treatment on microstructure of austenitic cast irons with high manganese content (Mn-Ni-resist) were investigated. The complex relationship between the development of the ...
    • Investigation on Nylon PA66 side arms using Taguchi and ANOVA analysis in reducing cost of producing urinary catheters 

      Mohd. Fathullah, Ghazli @ Ghazali; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib; Mohd. Nasir, Mat Saad; Muhamad Saifuldin, Abdul Manan (Praise Worthy Prize, 2011-11)
      This article discusses on a research experience and finding based on a collaboration with a medical equipment manufacturer in producing urinary catheters. The manufacturer had been spending high cost yearly to replace more ...
    • Milled groove square shape conformal cooling channels in injection molding process 

      Shayfull Zamree, Abd. Rahim; Safian bin Sharif, Prof. Dr.; Azlan, Mohd Zain, Dr.; Rozaimi, Mohd. Saad; Ahmad Fairuz, Mansor (Taylor and Francis Group, LLC., 2013-08)
      In designing molds for injection molding process, it is very difficult to achieve efficient cooling with uniform thermal distribution. To overcome these issues, the uses of conformal cooling channels with the uniform ...
    • A new invention of alarm reminder locking (ARL) security system 

      Mohd Effendi, Muhammad Suandi; Shayfull Zamree, Abd Rahim; Mohd Sazli, Saad; Mohd Nasir, Mat Saad; Badrul Azmi, Abdul Holed (Engg Journals Publications, 2016-02-01)
      Alarm Reminder Locking (ARL) Security System mainly focuses on a door security system, which can install in the door area to increase the security level for home, office room, hostel or other places. This system used Arduino ...
    • Optimal process conditions of warpage with thin-shallow features molded with pin-point gating system 

      Mohd Fathullah, Ghazli@Ghazali; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib; Mohd Nasir, Mat Saad; Muhamad Saifuldin, Abdul Manan (Praise Worthy Prize, 2011-11)
      Thin shallow plastic parts are widely produced using injection molding processes in producing varieties of components and applications. Warpage issue always happens in manufacturing thin shallow parts due to its uneven ...
    • Optimisation of Shrinkage and Strength on Thick Plate Part Using Recycled LDPE Materials 

      Norshahira, Roslan; Shayfull Zamree, Abd Rahim; Abdellah El-hadj, Abdellah; Mohd Mustafa Al Bakri, Abdullah; Błoch, Katarzyna; Pietrusiewicz, Paweł; Nabiałek, Marcin; Szmidla, Janusz; Kwiatkowski, Dariusz; Correia Vasco, Joel Oliveira; Mohd Nasir, Mat Saad; Mohd Fathullah, Ghazali (MDPI AG, 2021-04-05)
      Achieving good quality of products from plastic injection moulding processes is very challenging, since the process comprises many affecting parameters. Common defects such as warpage are hard to avoid, and the defective ...
    • Optimization of tile laying process parameters using taguchi's method 

      Norshah Afizi, Shuaib; Shayfull, Zamree Abd Rahim; Mohd. Fathullah, Ghazli @ Ghazali; Mohamad Ezral, Baharudin; Zaidi, Mohd Ripin (Praise Worthy Prize, 2011-11)
      This paper discusses the use of the Taguchi method of experimental design in optimizing process parameters of adhesion strength between tile and mortar bed. The effects of four process parameters of force, thinset mortar ...