Now showing items 1-20 of 56

    • KUKUM Artificial Marble 

      Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Mohd. Sobri, Idris; Mohd. Nazry, Salleh (Malaysian Invention and Design Society (MINDS), 2005-05-19)
      KUKUM Artifcial Marble based on polymer resin (thermoset or thermoplastic) and dolomite to create an artificial material that outperform and look like natural marble or tile physically, thermally and mechanically.
    • Cobalt Implant Composite (CIC) 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi; Mazlee, Mohd. Noor (Ministry of Higher Education (MOHE), 2005-09-30)
      Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique.
    • Enviro Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Madya Dr.; Che Mohd. Ruzaidi, Ghazali; Chek Idrus, Omar (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      Aluminium has been recycled since the days it was first commercially produced and today recycled aluminium accounts for one-third of global aluminium consumption worldwide.
    • The fabrication of artificial marble from dolomite (Batu Reput) 

      Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)
      Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ...
    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.
    • Characterization and application of dolomite rock in Perlis 

      Mohd Nazry, Salleh; Farizul Hafiz, Kasim; Khairul Niza,r Ismail; Che Mohd Ruzaidi, Ghazali; Saiful Azhar, Saad; Suhardy, Daud (Universiti Teknologi Malaysia (UTM), 2006-07-24)
      Dolomite which is known by the local as ‘batu reput’, is a primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of dolomite in Malaysia that contain large deposit of high-purity ...
    • ‘Batu Reput’ used as raw material in fertilizer production 

      Mohd Nazry, Salleh; Farizul Hafiz, Kasim; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Saiful Azhar, Saad; Suhardy, Daud (Malaysian Institute for Nuclear Technology Research (MINT), Xapp Malaysia-MNS & Universiti Kebangsaan Malaysia (UKM), 2006-11-29)
      ‘Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ...
    • Stability of Perlis dolomite under various heating condition 

      Mohd Nazry, Salleh; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Farizul Hafiz, Kasim; Saiful Azhar, Saad; Suhardy, Daud (Universiti Teknologi Mara (UiTM), 2006-12-08)
      Dolomite is a yellowish colored rock that can be found abundantly in Perlis. The rock has been used traditionally either to cover the rural road before it is tarred or to normalize the soil before any crops is planted. ...
    • Comparative characterization of Clinker’s microstructure at different temperature zone during cement production 

      Mohd Sobri, Idris; Khairul Nizar, Ismail; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (Science Publications, 2007)
      Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ...
    • Kayan 1: a Particle Board from Rice Husk 

      Suhardy, Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohd Nazry, Salleh; Farizul Hafiz, Kassim; Saiful Azhar, Saad; Tengku Nadzlan, Tengku Ibrahim; Wan Su, Haron; Mohamed Zulkali, Mohamed Daud, Prof. Madya Dr. (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.
    • Husk Board: A Panel Board from Waste 

      Suhardy, Daud; Tengku Nadzlan, Tengku Ibrahim; Farizul Hafiz, Kasim; Mohd Nazry, Salleh; Mohabattul Zaman, NS Bukhari, Ir.; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohammed Zulkali, Mohammed Daud, Prof. Madya Dr.; Saiful Azhar, Saad; Wan Su, Haron (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      The invention is about a husk board, manufactured from rice husk. Rice husk is about industrial waste. The rice husks were blended with binder and a hardener before compaction by using hot press.
    • Hot corrosion behaviour of Austenitic Steel-308 in Chloride salts 

      Mohammed Misbahul, Amin; Che Mohd Ruzaidi, Ghazali; Neelofar, Amin (School of Materials Engineering, 2008)
      The intensification of process engineering in almost every branch of modern technology, and development of new technologies make increasingly higher requirements for metallic construction materials, especially for their ...
    • Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Slovak Academy of Sciences, 2010-03-01)
      The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ...
    • Comparative study on thermal, compressive, and wear properties of palm slag brake pad composite with other fillers 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2011)
      The attractive performance-to-cost ratio associated with the incorporation of waste material in composite formulations used to produce brake pads has stimulated the idea of exploring the possible incorporation of additional ...
    • Influence of solids-to-liquid and activator ratios on calcined kaolin cement powder 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Luqman, Musa, Dr.; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng Yong; Khairul Nizar, Ismail; Mohammed, Binhussain; Liew, YunMing (Elsevier BV, 2011)
      This paper summarizes the effect of activator ratio on the processing of cement powder. Geopolymer slurry was produced via alkaline activation of calcined kaolin. Once the geopolymer slurry solidified, it was crushed and ...
    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...
    • Biodegradability analysis of KBF reinforced poly (lactic acid) biocomposites 

      Maizatulnisa, Othman, Dr.; Nor Azowa, Ibrahim, Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Nazarudin, Zakaria, Dr.; Zahurin, Halim, Dr. (Trans Tech Publications, 2012)
      Poly (lactic acid) (PLA) and kenaf bast fiber (KBF) were melt-blended using brabender into films in the PLA/KBF ratios of 100/0, 90/10, 70/30 and 50/50 for natural soil burial test. This formulation was used to study the ...
    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...
    • Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; O. A. K. A., Karem; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Rafizah, Abu Rashid; Norazian, Mohamed Noor (Trans Tech Publications, 2012)
      Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
    • Effect of mechanical activation on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Liew, Y. M. (Trans Tech Publications, 2012)
      Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...