The effects of SBR/NBRr blends on thermal properties of such thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) were carried out. Results showed that by incorporating the smallest size NBRr ...

The utilization of nitrile glove waste will spark a great deal of interest in the rubber industry in developing cost-effective techniques to convert waste and used rubber into a processable form. Blends of styrene butadiene ...

Polypropylene(PP)/Acrylonitrile butadiene rubber(NBRr)/rice husk powder(RHP) composites was fabricated with silane and acetic anhydride treatment agent. The in- situ formed RHP filled PP/NBRr composites were prepared by ...

The effect of cure characteristics and hardness of LCr filled SMR L compound were investigated. The size of LCr were 20 - 25 mm in range. Six compounds; 0, 5, 15, 2 5, 35 and 5 0 per hundred rubber (phr) of LCr were prepared ...

This investigation involves pure HDPE and then HDPE with addition of soya spent powder with different weight percentagesbefore and after exposing in the oven aging. The characteristics of pure HDPE and HDPE/ soya spent ...

The effects of physical and morphological properties of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends were investigated. Blends. Both uncompatibilised and compatibilised ...

Recycling waste rubber products by utilising them in rubber blends had provided the simplest and most cost-effective ways in solving several environmental issues regarding the abundance of scrap rubbers. Discarded nitrile ...

Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ...

In this study, the degradability of low linear density polyethylene (LLDPE) and soy spent powder blends under outdoor exposure of Malaysia. Cobalt stearate was used as a pro-oxidant. The degradation of the blends was ...

The virgin polyethylene (vPE) and recycled polyethylene (rPE) was melt blended with ethylene propylene diene terpolymer (EPDM) in different ratio by using a Haake Rheomix at 180°C and 50 rpm were prepared. The characterization ...