Show simple item record

dc.contributor.authorShamsul Baharin,  Jamaludin, Prof. Dr.
dc.contributor.authorTan, Wei Leng
dc.contributor.authorNur Hidayah, Ahmad Zaidi
dc.contributor.authorZuraidawani, Che Daud
dc.contributor.authorMazlee, Mohd Noor, Dr.
dc.date.accessioned2014-04-15T14:01:51Z
dc.date.available2014-04-15T14:01:51Z
dc.date.issued2013
dc.identifier.citationAdvanced Materials Research, vol. 795, 2013, pages 78-81en_US
dc.identifier.isbn978-303785811-0
dc.identifier.issn1022-6680
dc.identifier.urihttp://www.scientific.net/AMR.795.78
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/33715
dc.descriptionLink to publisher's homepage at http://www.ttp.net/en_US
dc.description.abstractPorous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at 1150°C in a tube furnace under argon atmosphere. Sintered samples were examined in terms of bulk density, porosity, hardness and pore size. Microstructural analysis was carried out using a scanning electron microscope (SEM). Microstructure analysis showed that pore sizes and pore shape were influenced by different compaction pressure. The hardness of the samples increased as compacting pressure increased. Density and porosity remained constant at certain level.en_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectCobalten_US
dc.subjectPorousen_US
dc.subjectPowder metallurgyen_US
dc.subjectSinteringen_US
dc.subjectTissue engineeringen_US
dc.titleFabrication and characterization of porous F-75 for potential application in tissue engineeringen_US
dc.typeArticleen_US
dc.contributor.urlsbaharin@unimap.edu.myen_US
dc.contributor.urlhidayah@unimap.edu.myen_US
dc.contributor.urlzuraidawani@unimap.edu.myen_US
dc.contributor.urlmazlee@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record