This page provides access to research works by Nur Hidayah Ahmad Zaidi, currently a Lecturer of School of Materials Engineering, Universiti Malaysia Perlis (UniMAP).

News

Skills and Expertise: Engineering, Research Methodology, Materials Science, Biomaterials, and Composite

Recent Submissions

  • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

    Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
    Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
  • Design and development of sensing system for mines detector robot 

    Ahmad Firdaus, Ahamad Zaidi; Cherng, Yeoh Wei; Handy, Ali Munir; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2014)
    This paper presents the design and development of sensing system for mines detector robot. The objective of this project is to identify the optimum metal detection system and design and develop the sensing system of mines ...
  • Design and development of remote communication system for mines detector robot 

    Ahmad Zaidi, Ahmad Firdaus; Nur Hidayah, Ahmad Zaidi; Faydi, Kang (Trans Tech Publications, 2014)
    This paper describes the design and development of remote communication system for mines detector robot. This project uses a PIC18F4580 microcontroller to control the robot movements and functions. A metal detector will ...
  • Kinetic and thermodynamic studies on adsorption of copper ions onto pomelo peel (citrus grandis) 

    Mst. Noorzahan, Begum, Dr.; Aimi Noorliyana, Hashim; Md Fazlul, Bari, Dr.; Norzilah, Abdul Halif, Dr.; Nur Hidayah, Ahmad Zaidi; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
    The ability of pomelo peel (PP) as natural adsorbent to remove Cu (II) ions from aqueous solution was investigated. The influence of solution pH, contact time and temperature were evaluated. Cu (II) removal increased as ...
  • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

    Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
    Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...
  • Preliminary study of hap addition to Co-Cr-Mo alloy fabricated by powder metallurgy method 

    Nur Maizatul Shima, Adzali; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman; Nur Hidayah, Ahmad Zaidi (SIRIM, 2010-11-22)
    This preliminary study of HAP addition in Co-Cr-Mo (F-75) was carried out by powder metallurgy method. The lab work comprises the mixing of Co-Cr-Mo with different HAP (hydroxyapatite) composition which varied from 0 wt. ...
  • Metal Implant 

    Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
    This research product is cobalt-chromium metal implant produced by powder metallurgy technique.
  • Cobalt Implant Composite (CIC) 

    Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi; Mazlee, Mohd. Noor (Ministry of Higher Education (MOHE), 2005-09-30)
    Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique.
  • Characterization of F75-HAP produced by Powder Metallurgy method 

    Nur Maizatul Shima, Adzali; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman; Nur Hidayah, Ahmad Zaidi (Universiti Malaysia Perlis, 2009-12-01)
    This research was carried out to study the properties of Co-Cr-Mo filled with different composition of HAP that have been prepared by powder metallurgy method. The raw materials used in this research were Co-Cr-Mo powder ...