Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 1-20 of 286
-
2D-modeling for the simulation of current-voltage characteristics in polysilicon schottky diode deposited by LPCVD and SAPCVD methods
(Universiti Malaysia Perlis, 2009)The aim of this work is to compare the quality of the Schottky contact obtained between Silver and the un-doped polysilicon layer deposited on glass substrate (Corning 1737) by using two techniques: Lower Pressure Chemical ... -
A 3rd order low-pass filter with high linearity and tunable in-band attenuation for WiMAX/LTE receiver
(Universiti Malaysia Perlis (UniMAP), 2019-10)In this paper, a Gm-C Low-pass filter with high linearity and tunable in-band attenuation for WiMAX/LTE receiver is presented. A linear Gm-cell is proposed and used as a key building block in design of the filter. The ... -
Active Control of Silver Nanostructure Aggregates for Ultrahigh Sensitive SERS Detection of Organic Molecules: Single Molecule Approach
(Universiti Malaysia Perlis (UniMAP), 2019-01)P-type and n-type of Porous Silicon (PSi) substrates have been prepared by electrochemical and photo-electrochemical etching processes, respectively. Unique morphological features of Psi were employed to synthesis efficient ... -
All-Solution-Non-Vacuum fabrication process of CZTS solar cell using ZTO as Non-Toxic Buffer Layer
(Universiti Malaysia Perlis (UniMAP), 2020-04)Material based on copper zinc tin sulfide (CZTS) has been investigated to obtain its optimum performances due to the non-toxicity, elemental abundance, and large production capacity. In this work, fabrication of CZTS-based ... -
Aluminum Incorporation Impacts on Some Physical Properties of Pure CdO Film Synthesized by Spray Pyrolysis
(Universiti Malaysia Perlis (UniMAP), 2018-04)Transparent conducting for pure and incorporated aluminum cadmium oxide (CdO:Al) thin films was prepared using spray pyrolysis method at a substrate temperature of 425 oC and a spray time of 25 minutes. The effects of ... -
Analysis of flip flop design using nanoelectronic single electron transistor
(Universiti Malaysia Perlis (UniMAP), 2017)Single Electron Transistor (SET) is a nanoelectronic device that operates under the controlled mode of tunnelled individual electrons. In this paper, a comparative analysis was performed employing SET based D-Flip flop ... -
Analysis of particles size distribution on the agglomeration and shrinkage of Alumina-Zirconia compacts
(Universiti Malaysia Perlis (UniMAP), 2020-05)The combination of Alumina and Zirconia has emerged as a promising ceramic structure for advance machine tool application. However, the particles of Alumina and Zirconia tend to agglomerate during mixture which affected ... -
Analysis of reliability for fault tolerant design in NANO CMOS logic circuit
(Universiti Malaysia Perlis (UniMAP), 2017)The emerging nano scaled electronic devices are Carbon Nanotubes (CNT), Silicon nanowires (SINW), nano CMOS switches, etc. In Nano CMOS switches, the devices can be interconnected to build the nano scaled CMOS circuit.In ... -
Analysis on continuous wearable device for blood glucose detection using GSR sensor
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper presents the development of a non-invasive approach to detect the blood glucose level using a galvanic skin response (GSR) technique. Previously, GSR had been used in many applications such as lie detector and ... -
Analysis on sound absorber panel made of oil palm mesocarp fibre using Delany-Bazley and Johnson-Champoux-Allard models
(Universiti Malaysia Perlis (UniMAP), 2020-05)Oil palm mesocarp fibre is seen as one potential of reinforcement in polymers due to its high strength, low cost, environmentally friendly nature and availability. Recently, it has attracted greater interest from academia ... -
An Analytical Analysis of Quantum Capacitance in Nano-Scale Single-Wall Carbon Nano Tube Field Effect Transistor (CNTFET)
(Universiti Malaysia Perlis (UniMAP), 2018-07)This paper discusses the quantum capacitance effect in single-wall conventional CNTFET devices. The analytical expression for quantum capacitance has been derived based on the normalized number of carriers/total charge ... -
Analytical Approach Assisted Simulation Study of Si, SiGe, and InP based Bipolar Junction Transistors
(Universiti Malaysia Perlis (UniMAP), 2019-04)This paper presents a comparative study of Si, SiGe and InP based Bipolar Junction Transistors (BJT) with reference to their DC, AC, and RF characteristics. Double diffusion doping profile in each case is used to determine ... -
Analytical modeling of energy quantization effects in nanoscale mosfets
(Universiti Malaysia Perlis, 2012)In this paper, we have studied and developed an analytical model for the inversion layer quantization in nano-metal oxide semiconductor field effect oxide (MOSFET) using the variation approach. Explicit surface potential ... -
Analytical Study of ion–selective electrodes using nanoparticulate ZnO
(Universiti Malaysia Perlis, 2015)Zinc Oxide nanoparticles (NPs) were prepared from raw materials via a microwaveassisted method. The ZnO NPs were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM). NPs were approximately 22.5 ... -
Annealing Effects on Band Tail Width, Urbach Energy and Optical Parameters of Fe2O3:Ni Thin Films Prepared by Chemical Spray Pyrolysis Technique
(Universiti Malaysia Perlis (UniMAP), 2019-01)In this research, nickel doped Iron oxide (Fe2O3:Ni) thin films were deposited onto glass substrates by using chemical spray pyrolysis (CSP) technique. The deposited films thickness was found to be about 350±30 nm. The ... -
Annealing effects on opto-electronic properties of Ag₂O films growth using thermal evaporation techniques
(Universiti Malaysia Perlis, 2016)High quality transparent conductive silver oxide (Ag₂O) nanocrystals thin films were prepared successfully using thermal evaporation method using pure Ag metal, followed by Oxidation process under two different oxidation ... -
Annealing Effects on the Structural, Optical and Electrical Properties of Chemically Deposited CdS Thin Films using NH4Cl Complexing Agent
(Universiti Malaysia Perlis (UniMAP), 2018-04)This study aims to deposit different thicknesses of CdS thin films with a variation of deposition time by using chemical bath deposition technique. The aqueous solution of cadmium chloride, ammonium chloride, ammonium ... -
Application of synopsys' taurus TCAD in developing CMOS fabrication process modules
(Universiti Malaysia Perlis, 2009)Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor processing and devics operation. TCAD has two major functions namely process simulation and device simulation. It performs the semiconductor ... -
Aspirin adsorption on multiwalled carbon nanotubes and its release characteristics in simulated body fluid
(Universiti Malaysia Perlis, 2014)Carbon nanotubes (CNTs) have been proposed and actively explored as innovative carriers for drug delivery applications. The functionalization of carbon nanotubes can improve substantially their dispersability and ... -
Band structure and optical properties of some quasi-molecular AI₃ (A=Sb, Bi, As)
(Universiti Malaysia Perlis, 2010)We perform first principles density functional pseudopotential calculation for the description of band structure ans optical responses a prototypical family of quasi-molecular layered solid of the type Al₃ where A = Sb, ...