Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 349-368 of 383
-
Synthesis methods of tin oxide as photoanode for dye-sensitized solar cell performance: A short review
(Universiti Malaysia Perlis (UniMAP), 2021-12)This review focused on the synthesis methods of tin oxide (SnO2) nanoparticles as a photoanode for dye-sensitized solar cell (DSSC) and how it impacts the performance. There are many different techniques and various ... -
Synthesis of a self-reeling hose system for bathroom use
(Universiti Malaysia Perlis (UniMAP), 2022-03)This work was carried out to design and test the self-reeling hose for bathroom use to achieve convenience and hygiene in the bathroom. The distribution of von Mises stress, displacement and safety factors were considered. ... -
Synthesis of calcium phosphate: Influence of sintering temperature on the formation of fluorhydroxyapatite
(Universiti Malaysia Perlis, 2020-01)Calcium phosphate biomaterials can be classified as polycrystalline ceramics. Hydroxyapatite is one kind of calcium phosphate biomaterials which is also a mineral component in hard tissue, especially dental and bones. ... -
Synthesis of Copper Oxide Nano‐Rods by Microwave‐Assisted Combustion Route and their Characterization Studies
(Universiti Malaysia Perlis (UniMAP), 2018-04)The present study demonstrates how petal‐shaped copper oxide (CuO) nano‐rod structures were fabricated using the microwave‐assisted combustion method. The prepared material was annealed at a temperature of 500°C and ... -
Synthesis of MWCNTs/TiO2 photocatalytic nanocomposite membrane via In-situ colloidal precipitation method for methyl orange removal
(Universiti Malaysia Perlis (UniMAP), 2022-07)This research aims to examine the performance of photocatalytic nanocomposite membrane for methyl orange dye (MO) removal. Multiwalled carbon nanotubes (MWCNTs) and titanium dioxide (TiO2) are used as nanofillers to produce ... -
Synthesis of polyaniline for water remediation and evaluating its feasibility to be reused as electrical conductor
(Universiti Malaysia Perlis (UniMAP), 2020-05)Adsorption is an effective process for humic acid removal; however, disposing the spent adsorbents creates secondary waste to the environment. Hence, this study aims to investigate the feasibility of using polyaniline ... -
Synthesis of sustainable binary calcium monosilicate ceramics from bio-waste: effect of sintering temperature on microstructure and electrical properties
(Universiti Malaysia Perlis (UniMAP), 2023-01)This study was conducted to synthesise calcium monosilicate ceramics using rice husks and raw eggshells and investigated the effect of sintering temperature on the physical, microstructure and electrical properties of ... -
Synthesis, Characterization and Visible Light/NIR Photodetector of CuO Nanowires Fabrication
(Universiti Malaysia Perlis (UniMAP), 2019-01)This works successfully synthesized vertically aligned, high density, long, large aspect ratio of CuO nanowires (CuO NWs) via thermal oxidation of copper (Cu) foil with atmospheric air. The oxidation process was conducted ... -
Taguchi Method for p-MOS threshold voltage optimization with a gate length of 22nm
(Universiti Malaysia Perlis (UniMAP), 2023-01)This paper describes the virtual design of a 22nm gate length p-type metal oxide semiconductor, PMOS. Silvaco, TCAD tools were used to fabricate the device design and to characterize the device’s electrical properties. ... -
Technique to enhance the bandwidth of a very thin Artificial Magnetic Condutor (AMC)
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper introduces a technique to enhance the bandwidth of the Artificial Magnetic Conductor (AMC). A multilayer patch type of Frequency Selective Surface (FSS) is stacked on the AMC structure, to increase the thickness ... -
Temperature effects on the optical properties of bismuth nanoparticles prepared by PLAL for antibacterial activity
(Universiti Malaysia Perlis (UniMAP), 2023-01)Bismuth nanoparticles (Bi NPs) constitute a promising technology for combating infectious illnesses and bacterial resistance to antibacterial treatments. Bi NPs were synthesized by Pulsed Laser Ablation in Liquid (PLAL) ... -
Test load determination on composite Standard Malaysian Rubber constant viscosity 60 for earthquake isolator
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper describes the test load determination on composite Standard Malaysia Rubber constant viscosity 60 for earthquake isolators. The usage of natural rubber in the development of earthquake isolators for building ... -
Textural and Adsorption Analysis of Nanocarbon Particles
(Universiti Malaysia Perlis (UniMAP), 2018-07)In this present work, the characterization of the nanocarbon material which is multi-walled carbon nanotube (MWCNT) and carbon nanofiber (CNF) was investigated using nitrogen gas adsorption technique, Fourier transform ... -
Theoretical demonstration of elastic wave guiding in a Pillar-Based phononic crystal slab
(Universiti Malaysia Perlis (UniMAP), 2020-12)We demonstrated theoretically the wave guiding of elastics waves in a two-dimensional (2D) phononic crystal (PnC) slab. The simulation model based on the Finite Element Method (FEM) was used to calculate the dispersion ... -
Theoretical model for temperature distribution resulting from CW-Laser radiation heats up tumor tissues
(Universiti Malaysia Perlis (UniMAP), 2019-10)Continuous wave laser radiation is used to heat up tumor tissue where the cells in this tissue are more sensitive to heating. Temperature distribution is connected to hyper thermal therapy. First, the nonlinear bio-heat ... -
Thermal Effect on Mirror Reflectivity Based on DBR for Optoelectronics Devices
(Universiti Malaysia Perlis (UniMAP), 2019-01)In this work, the thermal effect on the mirror reflectivity based on distributed Bragg reflector (DBR) in terms of the center wavelength shifting and reflectivity ratio is theoretically investigated and experimentally ... -
The thermal, surface chemical, and electrical properties of BiFe1-xZnxO3 (x = 0, 0.06, 0.12) Nanocrystalline through Sol-gel Technique
(Universiti Malaysia Perlis (UniMAP), 2021-07)The synthesis of zinc doped bismuth ferrite has been successfully carried out using the sol- gel autocombustion method. The thermal properties through the TGA test showed that the mass began to stabilize in the range of ... -
Thermo-mechanical and adhesion performance of Silver-Filled Conductive Polymer Composite (SFCP) using Thermoplastic Polyurethane (TPU) Substrate
(Universiti Malaysia Perlis (UniMAP), 2020-05)Emerging of conductive metal filler in nanoscale like Silver-Filled Conductive Polymer Composite (SFCP) ink is one of the important technology for electronic interconnects future. Among the key challenges in the successful ... -
Third Order Nonlinear Properties of Rhodamine B Dye Doped PVA Polymer Determined by Eclipsing Scan Technique
(Universiti Malaysia Perlis (UniMAP), 2018-04)Nonlinear (NL) optical properties were observed in Rhodamine B (RB) dyes doped in poly (vinyl alcohol) (PVA) polymer films. Eclipsing Z‐scan (EZ‐scan) with a continuous wavelength of 532 nm was used to investigate the ... -
Three-dimensional uniaxially aligned nanofibre construct using secondary electrode assisted gap electrospinning
(Universiti Malaysia Perlis (UniMAP), 2020-05)Electrospinning is a simple, versatile, and scalable method of producing polymeric nanofibres from a solution or melt using electric charge. Due to their nanometre-scale diameters, electrospun fibres have been the subject ...