Browsing Theses & Dissertations by Title
Now showing items 33-52 of 674
-
Camera motion estimation and object extraction using Multiple Consecutive Frames with ghost and noise removal for Pan-Tilt-Zoom Camera
(Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2014)This research presents a new algorithm for extracting moving objects using Pan-Tilt- Zoom (PTZ) camera. Previously, system that uses moving camera faces some problems, including misalignment between current and template ... -
Capacity and coverage enhancement for multi-hop relay in long term evolution-advanced network
(Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2014)Cellular networks known have difficulty to provide satisfactory SINR level to users at the cell boundaries. Therefore, multi-hop relay is considered as one of the main keys for Long Term Evaluation - Advanced (LTE-A) to ... -
Cascaded push-pull and cascaded h-bridge inverter for total harmonic distortion reduction in stand-alone photovoltaic system
(Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2013)This thesis presents the cascaded Push-Pull and cascaded H-Bridge inverter for total harmonic distortion (THD) reduction in stand-alone photovoltaic (PV) system. This study involves the development of the proposed cascaded ... -
Chaotic neural network based MPEG-2 video encryption framework over wireless channel
(Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2014)The increasing demand for retrieving secure and high quality of multimedia service applications corresponding to available bandwidth channel proposes new challenges for system engineering designers to implement efficient ... -
Characterisation and properties of aluminium/zinc oxide composites as catalytic gases from depolymerisation of low density polyethylene to liquid oil
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2012)The effects of addition zinc oxide (ZnO) or magnesium trisilicate (MTS) in aluminum (Al) matrix composites on physical and mechanical properties at different sintering temperature were studied. The Al/ZnO and Al/MTS ... -
Characteristics and properties of activated carbon from bamboo filled Styrene Butadiene Rubber (SBR) vulcanizates
Carbonized bamboo and bamboo activated carbon (AC) were prepared via carbonization process and chemical activation process using potassium hydroxide (KOH) as activating agent. Carbonization process was conducted at different ... -
Characterization and in-vitro activity of powder metallurgy magnesium-zinc/bioglass composite for biomedical applications
In this study, bio-glass 45S5 powder was added into the mixture of Mg-Zn powders to produce biocomposite using powder metallurgy method for biomedical applications. The bio-glass composition was varied from 0, 5, 10, 15, ... -
Characterization and mechanical properties of coconut shell filled acrylonitrile butadiene styrene / ethylene propylene diene monomer composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2009)Coconut shell filled ABS/EPDM composites were prepared using a Z-blade mixer at processing temperature 2000C and rotor speed 50rpm.Effect of chemical treatment,different composition of blend ratio , different filler loading ... -
Characterization and mechanical properties of geopolymer materials using kaolin and white clay for coating application
Geopolymer exhibit a wide variety of properties in various applications including coating. Geopolymer as inorganic coating has good bonding structure of amorphous inorganic polymer which has excellent bonding agent properties ... -
Characterization and properties of calcium carbonate filled polypropylene (PP) / ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2009)Composites of thermoplastic elastomer blend of polypropylene (PP) and ethylene propylene diene terpolymer (EPDM) reinforced calcium carbonate (CaCO3) was investigated. All the composites were prepared by using Z-blade ... -
Characterization and properties of natural rubber/styrene butadiene rubber/recycled acrylonitrile butadiene rubber (NR/SBR/rNBR) blends
Utilization of recycled rubber in rubber blends preparation has provided the simplest and most cost-effective method in recycling discarded rubber products. The increasing demand for nitrile latex glove and it high consumption ... -
Characterization and properties of palm fiber filled unsaturated polyester composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2011)The research on characterization and properties of palm fiber (PF) filled unsaturated polyester (UP) was investigated. The composites were prepared by using hand lay up technique before cured on oven about 10 minutes at ... -
Characterization and properties of palm kernel shell filled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2011)Biocomposites based on palm kernel shell (PKS) and low density polyethylene (LDPE) was investigated. The biocomposites were prepared by using Z-Blade mixer at processing temperature 180 oC and rotor speed 50 rpm. The effect ... -
Characterization and properties of Recycled Acrylonitrile Butadiene Rubber (rNBR) filled Epoxidized Natural Rubber (ENR 25) compound
The uses of recycled rubber in rubber compounding become an alternative method to reduce the landfill of rubber waste and gives opportunity to produce new product. In this research, the study on the properties of recycled ... -
The characterization and properties of recycled natural latex gloves (rNL-G) filled acrylonitrile butadiene rubber (NBR) compounds
The utilization of waste rubber from recycled natural latex gloves (rNL-G) by means of compounding together with synthetic rubber: acrylonitrile butadiene rubber (NBR) could represents a new product with an acceptable ... -
Characterization and properties of recycled polypropylene (rPP)/ recycled high density polythylene (rHDPE) blends and its composites
The thermoplastic blends of recycled polypropylene (rPP) and recycled high density polyethylene (rHDPE) was studied. The rPP/rHDPE blends were prepared by using twin screw extruder at temperature 190⁰C and rotor speed of ... -
Characterization and properties of recycled polypropylene (RPP)/chloroprene rubber (CR) blends
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2011)The thermoplastic elastomer of recycled polypropylene (RPP) and chloroprene rubber (CR) blends were studied. Virgin polypropylene (PP)/chloroprene rubber blends were used as comparison. The blends were prepared by using ... -
Characterization of alignment mark to obtain reliable alignment performance in advanced lithography
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007)The continued downscaling of semiconductor fabrication has imposed increasingly tighter overlay tolerances. Such tight tolerances will require very high performance in alignment. Hence, the objective of this research to ... -
Characterization of molecularly imprinted polymer (MIP) for an extraction Of curcumin from Curcuma longa (Turmeric)
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2012)A molecularly imprinted polymer (MIP) for selective extraction of curcumin has been synthesized via non-covalent approach by using curcumin as a template. Polymerization was prepared using 2 (two) functional monomers ... -
Characterization of nature Dye-sensitized solar cell (DSSC) based on Nanocrystalline Titanum Dioxide
(Universiti Malaysia Perlis (UniMAP)School of Electrical System Engineering, 2015)Dye-sensitized solar cell (DSSC) or ‘Gratzel cell’ is a low-cost solar cell from the thin film family which consists of TiO2 electrode coating, sensitizer from dye molecules soaked in the TiO2 film, a mediator electrolyte ...