Browsing School of Microelectronic Engineering (FYP) by Title
Now showing items 55-74 of 153
-
Design of tool kit for Active Filter Circuit PC-based
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Filters are circuit that pass selected frequencies while rejecting other frequencies. Active filter use active device such as op-amp combined with passive elements such as resistor, capacitors and inductors. The active ... -
Design of Voltage Control Oscillator (VCO) In 0.18u CMOS
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)This VCO are designated using cascade technique and differential common-mode change. The measured are 4 stages at 2.0GHz with power dissipation 20mWatt. For this final year project,mentor grahics software has use for design ... -
Design prototype of prepaid water dispenser
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Telecommunication technology have change currently, had many change the pattern human life.This is because telecommunication technology already contribute a lot to pattern of life a more convenient. Realizes of this ... -
Design, simulation and characterization of Moly Permalloy based electromagnetic sensor
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)This paper shows the design, simulation and characterization of Moly Permalloy based electromagnetic sensor in MEMS software. The dimension of the device is minimized to the smallest that the software can be simulated ... -
Designing, Fabricating And Characterizing A Microfluidic Capacitor
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Today, being the dawn of a new technology wave, Micro electromechanical Systems or MEMS have promised a new beginning to a wide spectrum of fields. Microfluidics marked another milestone in this area as highly effective ... -
Develop algorithm for forward clarke transformation
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)This project focused on verilog HDL design, simulation and waveform analysis for Forward Clarke Transformation. Forward Clarke Transformation is used to control motors in which it can convert 3 phase to two phase flow ... -
Develop algorithm for inverse park transformation
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)The park transform can be used to realize the transformation of the Ids and the Iqs current from the stationary to the moving reference frame and control the spatial relationship between the stator vector current and rotor ... -
Development of gender and race recognition system using speech and recognition by using frequency spectrum
(School of Mechatronics Engineering, 2008-05)In this thesis, the development of an algorithm and system that is able to recognize gender and races by using the speech frequency spectrum is presented. Some of the features extracted are the formant frequency and ... -
Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Indium Doped Ba0.5Sr0.5TiO3 Thin Film
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Barium strontium titanate (Ba0.5Sr0.5TiO3) is one of the most important sensing materials for multi-function sensors. Basically, the sensing properties can be controlled by minor modification of the dopants. The purpose ... -
The Effect of Annealing Temperature and Dopant Concentration on the Surface Layer of Vanadium Doped Barium Strontium Titanate (BVST) Thin Film
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Vanadium is classified as a transition metal and is the most important in its group. It finds extensive use in the manufacturing of special steels with exceptional strength and toughness. The dopant concentration of ... -
Effect of different dielectric materials for Ultrathin Oxide
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)This paper I want to describe the reliability study of the effect of different dielectric materials for ultrathin oxide. The alternative high–k gate dielectrics are to provide a substantially thicker (physical thickness) ... -
The Effect of Power Density on the Surface Layer of Amorphous Thin Film
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)The development of amorphous silicon (a-Si) device technology since the advent of the first solar cell in 1974 has been truly spectacular with commercial products such as photocopiers, laser printers, facsimile machines, ... -
The Effect of Process Parameters on Metal Step Coverage for Aluminum by Evaporation Technique
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)The degree to which deposited metals cover steps over topography is important to the yield and reliability of devices in very large scale integrations (VLSI). In evaporated and sputtered thin films, the most difficult steps ... -
Electrical characterization of 0.13 µm NMOS transistor with Retrograde Well and Halo Implant Structure Respectively
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)This project is about the usage of Technology Computer Aided Design (TCAD) in order to construct NMOS transistor with gate length 0.13 µm. TCAD is use in computer simulation as process modelling and device operation. ... -
Electrical characterization of 0.13µm CMOS Transistor using TSUPREM-4 and MEDICI
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor processing and device operation. TCAD has two major functions which are process simulation and device simulation. It performs the ... -
Electrical characterization of 0.15µm CMOS Transistor using TSUPREM-4 and MEDICI
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Physical and electrical characteristics of 0.153m Complementary Metal Oxide Semiconductor (CMOS) were studied. Fabrications of the devices were done by TSUPREM-4 simulator and electrical characteristics extraction will ... -
Fabrication and characterization of Barium Strontium Titanate (BA1-XSRXTIO3 BST) for heat sensor application
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Ferroelectric Barium Strontium Titanate (BST) thin films were successfully prepared by wet chemical deposition or sol-gel method and characterized using SPA, AFM, and sensing properties. The BST thin film was fabricated ... -
Fabrication and simulation of PNP Bipolar transistor based on Spin On Dopant technique and Electrical characterization
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)In this project, the fabrication and simulation of pnp transistor was performed. From fabrication process, the electrical characteristic and sheet resistance of the device was observed by 4 point probe measurement. The ... -
Fabrication Of 50 µm transistor and AlNiAu interconnection process
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)Generally process fabrication transistor will starts by cleaning the wafer, formation region drain, D and source, S, get oxide and deposited aluminum as contact with the source, drain and gate. Mask is very important thing ... -
Fan control and monitoring system using Visual Basic program
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)This thesis is about the usage of a system to control and monitor a fan or more for certain kinds of operation and application in real life. This is including on how to control the fan speed manually or by using temperature ...