School of Materials Engineering (FYP): Recent submissions
Now showing items 81-100 of 256
-
Effect of high weight percent of space holder on porosity and microstructure of aluminum foam manufactured by sintering-dissolution process (SDP)
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This experiment was carried out to study the effect of high weight percent of space holder on porosity and microstructure of aluminum foam manufactured by Sintering-Dissolution Process (SDP). SDP consist of mixing, ... -
The effect of HAP addition on the physical and mechanical properties of co-cr-mo/HAP composites for biomedical apllications
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)This paper reports on the effect of HAP addition on the physical and mechanical properties of Co-Cr-Mo/HAP composites fabricates by powder metallurgy. Co-Cr-Mo is used in orthopedic because of its excellent biocompatibility ... -
The effect of iron addition and tungsten content on the corrosion resistance of w-pre alloy brass composite
(University Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)In this project, the W-pre alloy brass composite is prepared through compacting method of powder metallurgy. Different composition of brass and tungsten was prepared and samples with iron addition sintered together using ... -
Mechanical and thermal performance of fly ash (FA) geopolymer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research is carried out to study the mechanical and thermal performance of fly ash geopolymer exposed to high temperature. Fly ash (FA) is the waste product that can be the raw material to make geopolymers. The fly ... -
Thermal properties of biocomposites based on sea mango fibers
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The effect of sea mango (SM) filler loading and the effect of amount used of polypropylene-graft-maleic anhydride (PP-g-MA) added as a compatibilizer on thermal properties and flow behavior of biocomposites were studied. ... -
Synthesis of chlorophyll thin film from euphoria malaiense leaves by using dip coating sol-gel process
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-06)Chlorophyll is the green pigment responsible for the photosynthesis processes that occur in green leaf. The main function of the chlorophyll is to extract sunlight. This function is so desirable in solar cell, as to ... -
Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-05)This research is mainly focused on mechanical properties of polyurethane foam filled with kenaf fiber and tyre rubber particles with addition of different amount kenaf loading (2%, 4%, 6% and 8%) and size of tyre rubber ... -
Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research was focused on the effect of sea mango fiber (SMF) content and chemical modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ... -
The use of jackruit peel as filler in polylactic acid biocomposite films: effect of filler modification
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The biocomposite films of jackfruit peel filler (JPF) and poly(lactic acid) (PLA) were prepared by solution casting method. The effect of jackfruit peel filler (JPF) content and modification of JPF by silane coupling agent ... -
Synthesis and characterisation of SiC nanomaterials from reaction of palm kernel shell and silica
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Silicon carbide (SiC) is one of the non-oxide ceramic materials that are widely developed due to its superior properties. Typically, SiC nanomaterials are synthesised by using high purity of silicon react with high purity ... -
Effect of particle size on rate sensitivity properties of sawdust reinforced Polyproplene (PP) composites under wide range of strain rates
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Particle size of natural fillers and strain rate can affect the mechanical properties of composite materials. However, there is limited research was done regarding on sawdust reinforced thermoplastic polymer under wide ... -
Influence of surface treatment on the properties of high density polyethylene composites filled with palm kernel shell
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The high density polyethylene (HDPE) composites filled with palm kernel shell (PKS) were prepared using Z-blade mixer at processing temperature 190 ˚C and rotor speed 30 rpm. The effect of filler loading of PKS on ... -
Effect of current stressing on intermetallic formation and mechanical properties of lead free SAC solder and SAC/activated carbon composite solder joint
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This study will investigate the effects of current stressing on intermetallic compound growth and the mechanical properties of lead free SAC and SAC/Activated carbon solder composite solder joint for certain current ... -
TensileE, Morphological and propesties of foy protein Isolate/Nanohalloysite composite films
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The effect of nanohalloysite (NH) content and its chemical modifications with methyl methacrylate (MMA) on the tensile properties, morphological, moisture content and enzymatic bidegradation of SPI/NH composite films ... -
Solid electrolyte for solid stat rechargeable lithium ion
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)Solid electrolyte for solid state rechargeable Lithium ion battery by using Li6Zr2O7 as one new element that could contribute better life cycle to the lithium ion battery. It is focus on two major categories: crystalline ... -
Effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The research study describes the effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy. The working process is divided into three (3) working phases which are solution treatment process, ... -
Mechanical studie of chitosan filled recycled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The chitosan filled recycled low density polyethylene (rLDPE) biocomposites were prepared by Z-blade mixer at the temperature 180 °C. The effects of chitosan loading on mechanical properties of the rLDPE/chitosan ... -
Influence of temperature on reduction behaviour of iron ore-coal composite pellets
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This present study investigated about influence of temperature on reduction behaviour in iron ore and coal composite pellet. The objectives about this research were to analyse the reduction behaviour between iron ore and ... -
Effect of the stabilizers on properties of natural rubber latex
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)The effect of the stabilizers on properties of natural rubber latex was investigated. Different stabilizer with different amount of the concentration was used to investigate the colloidal stability of the natural rubber ... -
A potential of corncob powder as filler in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Thermoplastic polyurethane(TPU) have been utilized as a matrix filled with corncob fibers. Thermoplastic polyurethane have been used in broad assortment industries and for many purpose like automotive, medical and etc. ...