Browsing School of Materials Engineering (FYP) by Subject "Waste products"
Now showing items 1-13 of 13
-
Basic study on oxidation treatment of rice husk
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)White husk ash suitable for use as reinforcement material for metal matrix composites. This rice husk based reinforcement material are material are prepared by first removing volatile constituent by heating the husks to a ... -
Effect of Ethylene Diamine-co-Acrylic acid (EDAA) on properties of Acrylonitrile Butadiene styrene/Waste tyre dust composites (ABS/WTD)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effect of coupling agent of ethylene diamine -co- and acrylic acid (EDAA) on properties of waste tyre dust ( WTD ) filled acrylonitrile butadiene stryene has been investigated. The investigation are including on the tensile ... -
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ... -
Preliminary study on bagasse fiber with Polystyrene as polymer composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)The interest in long term sustainability of material resources has make advancements in bio-composites or else name as polymer composite materials which made from natural fibers and resins. Natural fibers reinforced with ... -
A preliminary study on lightweight concrete made from Polystyrene waste
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Increasing importance of environmental awareness around the world has drawn a great attention on polymer recycling. The recycling processes are commonly meant to reproduce other polymeric material for domestic use or energy ... -
Preparation of anti rust paint with waste expanded Polystyrene
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A formula for making paint using waste expanded polystyrene foam (EPS) as a binder in place of alkyd resin in most of the commercial paint was developed. Through the experiment the formula follows: the base material (EPS) ... -
Preparation of rice straw-waste tire dust composite board
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this study agricultural lignocelluloses fiber (rice straw) and waste tire dust composite board were prepared using the method use in the wood-based panel industry. The manufacturing parameters were density (0.66g/cm3, ... -
The production of fly ash aggregates
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and ... -
The production of paper from sugarcane bagasse
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ... -
Production of particle board from banana leaves
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ... -
Production of particle board from sugarcane bagasse
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particle board has been used widely in the furniture industry nowadays. In this study, the production of particle board from sugarcane bagasse is to reduce the waste of bagasse and air pollution. This study produced by ... -
Study on mechanical characterization plastics waste as coarse aggregate (PWCA) for concrete
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Quantities of plastics waste have been increased these recent years due to the boost in industrialization and the rapid improvement in the standard of living. In Malaysia, most of plastics waste is abandoned and not ... -
Study on properties of sugarcane bagasse fiber filled Polypropylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Bagasse fiber is a residue of a sugarcane milling process. In this research, bagasse fiber has been used as filler in polypropylene (PP) resin to open up further possibilities in waste management. The chemical treatment ...