Browsing School of Materials Engineering (FYP) by Subject "Steel -- Welding"
Now showing items 1-6 of 6
-
Corrosion study on welded mild steel in soil environment
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)This study was carried out to determine the corrosion behavior of welded mild steel in soil environment. The welding process was done by arc welding method at 70, 80, 90, 100 and 110 ampere. The corrosion behavior of welded ... -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of welding current and cycles on the weldability of resistance spot welded low carbon steel with heat treatment process. The heat treatment processes that been ... -
The effect of welding current on mechanical properties of Galvanized steel sheets in resistance spot welding (RSW)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study about the effect of welding current and the cycles on the quality of weld joint on galvanized steel sheets using resistance spot welding. Examinations involve tensile shear and tensile peel strength (T-peel test) ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ... -
Welding characteristics of similar and dissimilar metal using resistance spot welding
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The two main areas concern of weld nugget quality from resistance spot welding processes for galvanized steel joints and galvanized steel with stainless steel joints. This project analyzed only the quality of weld nugget ...