Search
Now showing items 11-20 of 30
Coherent effect on LOCOS and STI technique for 0.18 µm CMOS technology using Taurus Workbench
(Universiti Malaysia Perlis, 2008-04)
LOCOS (Local Oxidation of Silicon) and STI (Shallow Trench Isolation) are two isolation techniques used in integrated circuit fabrication. Further device scaling using
LOCOS technique is no longer practical for technology ...
Design a current mirror using body driven technique
(Universiti Malaysia Perlis, 2008-04)
Current mirror or current source is a one of the key elements in analog circuit design. For high performance analog circuit applications, the accuracy and output impedance are the most important parameters to determine the ...
Design and analysis of Floating Point multiplier
(Universiti Malaysia Perlis, 2008-04)
The most important floating-point representation is defined in IEEE Standard 754, adopted in 1985. This standard was developed to facilitate the portability of programs from one processor to another and to encourage the ...
Study of the effect of different Gases parameter in Dry Etching process on Etch Rate profile
(Universiti Malaysia Perlis, 2008-04)
The principal focus of this project is dry etching technique by using the Inductively
Couple Plasma-Reactive Ion Etching (ICP-RIE). An (ICP) system was chosen because of
its high plasma density and low cost relative to ...
Optimization of 950K PMMA resists for Nano-application using Statistical Design Expert
(Universiti Malaysia Perlis, 2008-05)
This paper discusses the application of a design of experiments (DOE) experimental method for analyzing the influence of four parameters (coating time, spinning speed, and softbake time and softbake temperature).involved ...
Electrical characterization of 0.13µm CMOS Transistor using TSUPREM-4 and MEDICI
(Universiti Malaysia Perlis, 2008-04)
Technology CAD (TCAD) refers to the use of computer simulation to model semiconductor
processing and device operation. TCAD has two major functions which are process
simulation and device simulation. It performs the ...
Ultrasonic Range Meter using PIC19F876
(Universiti Malaysia Perlis, 2008-04)
This thesis reports the design and implement of a relatively inexpensive, but versatile and experimental of range meter controlled suitable for use in either a research or educational setting. The project is nearing ...
Serial Peripheral Interface (SPI) (Front End Design)
(Universiti Malaysia Perlis, 2008)
The Serial Peripheral Interface Bus or SPI bus is a synchronous serial data link. This device is one of ASIC design chip that have in the market. In this final year project
the new form of device will be created from the ...
Low cost Radio Controlled (RC) car with speed controller
(Universiti Malaysia Perlis, 2008-03)
Nowadays, microcontrollers play an essential role in our daily lives. For an electronics hobbyist, microcontrollers will offer a wide range of possibilities that would be
otherwise unreachable. A radio-controlled car (R/C ...
Electrical characterization of 0.13 µm NMOS transistor with Retrograde Well and Halo Implant Structure Respectively
(Universiti Malaysia Perlis, 2008-03)
This project is about the usage of Technology Computer Aided Design (TCAD) in
order to construct NMOS transistor with gate length 0.13 µm. TCAD is use in computer
simulation as process modelling and device operation. ...