Search
Now showing items 11-20 of 21
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia Perlis, 2008-04)
Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ...
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia Perlis, 2008-04)
Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre
reinforced MMCs. This study involves the fabrication of MMCs with ...
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia Perlis, 2008-03)
Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60%
in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ...
Corrosion properties of Stainless steel
(Universiti Malaysia Perlis, 2008-04)
Chromium content in austenitic stainless steel 304 and 316L can increase the resistance to pitting corrosion through the formation of passive layer on the surface of
metal. The corrosion properties of these stainless ...
The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
(Universiti Malaysia Perlis, 2008-04)
The aim of this research is to study the effect of cooling condition on microstructure and properties of Al alloy. Powder compacts from a premixed commercial aluminium powder Al-4.4Cu-0.8Si-0.5Mg (wt %) grade have been ...
Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
(Universiti Malaysia Perlis, 2008-05)
Aluminium-silicon-magnesium is usually applied in automotive industry such as in
block engine. The main objective of this project is to study the changes in microstructure, hardness and the thermal analysis curve after ...
Dynamic vulcanization of waste paper filled of low density polyethylene (LDPE)/ ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia Perlis, 2008-04)
The effect of filler loading and dynamic vulcanization of paper sludge (PS) filled
LDPE/EPDM was investigated. Blends with different filler loading ranging from 0 to 60 wt % were prepared in Z-blade mixer at 180 °C and a ...
Characterization of Dolomite and its suitability as a raw material for soap production
(Universiti Malaysia Perlis, 2008-04)
This study is about characterization and soap production by using dolomite as a raw material. Calcium hydroxide and magnesium hydroxide also have been used in this study as a raw material. Soap are made from fats and oil ...
A study of hardcoat anodizing on PM Al-Mg composite
(University Malaysia Perlis, 2008-05)
This research is being conducted to investigate an effect occurring on anodizing
process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ...
Conductive coating strategy for Magnesium alloy as a surface protection and reliability
(Universiti Malaysia Perlis, 2008)
The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ...