Search
Now showing items 11-20 of 163
UNIMAP class scheduling automation system
(Universiti Malaysia Perlis, 2007-04)
The purpose of this project is to design software that can automatically arrange
lectures and lab sessions according to subjects from each courses and years in a proper manner and to avoid from clash between other classes. ...
8-bits X 8-bits modified Booth 1’s complement multiplier
(Universiti Malaysia Perlis, 2007-05)
With advances in technology, many researchers have tried and are trying to design multipliers which offers either of following – high speed, low power consumption, regularity of layout and hence less area or even combination ...
Multi sensor monitoring and camera vision system
(Universiti Malaysia Perlis, 2007-04)
This project is to monitor the sensor (ultrasonic sensor) and measure the distance
between the robot and obstacle. The sensor will be mounting on the bipedal walking
robot and will generate the signal to main controller ...
Low Power Multiplier Accumulator (MAC) unit using Multiple Threshold CMOS
(Universiti Malaysia Perlis, 2007-04)
Recently, there has been an increasing demand for portable, battery-operated
devices like cellular phones and notebook computers. Scaling causes sub-threshold leakage currents to become a large component of total power ...
Design of Voltage Control Oscillator (VCO) In 0.18u CMOS
(Universiti Malaysia Perlis, 2007-03)
This VCO are designated using cascade technique and differential common-mode change. The measured are 4 stages at 2.0GHz with power dissipation 20mWatt. For this final year project,mentor grahics software has use for design ...
FPGA Implementation of Emergency Door Car Entry System
(Universiti Malaysia Perlis (UniMAP), 2007-05)
Emergency door car entry system can be implemented using Field Programmable Gate Array (FPGA) board. FPGA board is a board that can be programmed using source code to run the application that has been downloaded into it. ...
Mems Microrelay: Design, Modeling, and Simulation
(Universiti Malaysia Perlis, 2007-05)
A newly design of single pole single throw piezoelectric vertical actuation MEMS microrelay was successfully designed and modeled at the end of this project. This was implemented by using MEMS Pro LEdit CAD Modeler. Then, ...
Comparison of Various Barrel Shifter
(Universiti Malaysia Perlis, 2007-05)
Barrel shifters are often utilized by embedded digital signal processors and
general-purpose processors to manipulate data. This project design alternatives for 16
bit barrel shifters that perform the following function ...
Investigation and Modeling of Boron Diffusion Reduction in Silicon by Flourine Implantation using Numerical Simulation
(Universiti Malaysia Perlis, 2007-05)
With the increased interest in the use of fluorine co-implantation with boron for
boron diffusion reduction in the fabrication of semiconductor devices, it is important to
understand the mechanisms by which fluorine ...
Solar tracking system
(Universiti Malaysia Perlis, 2007-04)
This project is to develop a Solar Tracking System. Solar cells are very thin (about
1/100th of an inch thick). Most are rectangular or circular wafers made of silicon (sand), but some consist of a thin film that is mounted ...