Now showing items 1-15 of 15

    • Concrete sludge and paper sludge (CSPS) brick 

      Nor Asadah, Mohd Daud (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      Paper sludge is a waste from pulp and paper industry while concrete sludge is a waste from construction industry, has caused environmental impact problem besides the increasing of disposal cost. Focus this study, to ...
    • Critical review on site conventional system: request for inspection (RFI) paper foam 

      Mohd Najmi Muttaqin, Mohd Nasir (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Request For Inspection (RFI) is form that very synonym in site construction. It is used in every single step of construction such as to construct basement of the building. This form will be used in 3 phase of the ...
    • The development of ferro-cement sandwich panel for IBS 

      Fakhru Razi, Shaban (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      The development of ferrocement sandwich prefabricated structural element now day has grown in the construction industry were due to the specific characteristic needed, lightweight to ratio strength, saving material cost ...
    • Green technology readiness of contractors 

      Siti Afifah, Ahdin (Universiti Malaysia Perlis (UniMAP), 2015-06)
      Construction industry is acknowledged as one of the industries that contribute to major deflection on environment. The negative impacts of construction industry have been discussed on several issues such as consuming high ...
    • Implementation of construction waste management and minimization in construction industry of Kedah 

      Juliana Ayunie, Jamaludin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      A recent study highlighted fact that waste management in construction industry has been receiving less attention comparison with construction cost and time. Most of the contractors not practicing waste minimization, ...
    • Influence of mineral additions on the Recycled Aggregate Concrete 

      Nor Aisyah, Jusoh (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2011-05)
      Used of Recycled Aggregate (RA) in concrete can be described in environmental protection and economical terms. The application of recycled aggregate to use in construction activities have been practice by developed European ...
    • Investigation of the building defects at Kuala Perlis flats 

      Syahrul Azizi, Kamaruzaman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      The defect of concrete structures is a common phenomenon in the construction industry. Structural defect can occur in buildings and other structural parts and it is very difficult to detect and unknown cause. This study ...
    • Optimum mix ratio of concrete brick using rice husk ash 

      Norfazlin, Husin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      In the era of globalization, the demand for the use of construction materials is greatly increased when looking at the wide usage in construction and rising demand will pose a problem for some of the construction industry. ...
    • Properties of bricks with installation of bamboo fiber 

      Mohd Khairul Anuar, Mat Kupli (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The sand bricks are usually used extensively in the construction industry as a wall panel, part of the construction of drains and so on. Basically, sand bricks are using cement and normal sand such as ordinary Portland ...
    • Properties of sustainable concrete used of crushed demolition waste for fine aggregate substitution 

      Mohd Khairul Aizat, Mohamed (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The use of construction waste materials as aggregates for concrete production is kindly different compared to the use of non-renewable natural resources, promoting environmental protection and allowing the development of ...
    • Risk management in G7 construction company 

      Ili Hazwani, Ramli (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Construction projects are full with complexity and uncertainties that coming from various sources. Generally, all industry is involved with risk and it is the concern for the construction company. In construction industry, ...
    • Site project management record system using microsoft excel 

      Gan, Zi Wei (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      One of the great challenges in construction field facing nowadays is the management at construction site. To overcome this problem, several studies had been made to examine the various types of software applications ...
    • The structure defects and finishing of school building in Perlis 

      Nur Inani, Yunus (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Structural and finishing defect is a common problem that occurs in the construction industry. The structural defect can occur in buildings and other parts of structure. These are difficult to track and known the cause of ...
    • A study on implementation of green building index : Comparison between modern building and traditional houses 

      Syamim Adila, Zaidi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Green building is an integrated framework of design, construction, operations and demolitions practices that encompass the environmental, economic and social impacts of buildings. Green Building Index (GBI) is Malaysia’s ...
    • Titled case study on building condition at UniMAP Campus, Pauh Putra 

      Siti Sara, Abdul Halim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Structural damage is quite common phenomenon happen in construction industry. Its can occur especially on building and it very difficult to care or defect the cause of damage. Structural damage such as cracking, settlement, ...