Browsing Final Year Project Papers & Reports by Title
Now showing items 1287-1306 of 2200
-
Masonry bond by using different percentage of palm oil clinker substitution with water-cement ratio variation
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Palm oil clinker (POC) which is relatively low cost and abundantly available had the potential as a replacement for aggregates in the production of mortar. This study investigated the effects of substitution of palm oil ... -
Masonry bond strength by using palm oil clinker with different aggregate replacement and different mixing procedure
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)Mortar is very important thing in building composite because it is use to bind brick to become the wall. The wall is use to block anything that come from outside of the building to get into the inside of the building. ... -
Mass transport properties of Alginate Capsule
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)The alginate and chitosan were used for the preparation of controlled release solute. There are no systematically studies conducted to understand the correlation and the influence of process parameter on the mass transport ... -
Maximal Marginal Entropy (MME) discretization method to generate rule for Thyroid data set
(Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-05)This project is a study of using MME discretization method to generate rule for thyroid data set. Discretization is simply a method to change the continuous data to interval data set. Algorithm for finding the minimum ... -
Measurement of Drag Force on different robots at varying air speeds
(Universiti Malaysia PerlisSchool of Mechatronic Engineering, 2008-03)This report presents the measurements of drag force on different robots when they are subjected to severe atmospheric conditions. It is a common experience that a body meets some resistance when it is forced to move through ... -
Measurement study of data transmission in wireless mobile ad-hoc network
(Universiti Malaysia Perlis (UniMAP)School of Computer and Communication Engineering, 2015-06)Mobile Ad-hoc Network (MANET) is a network that consisting of a set of wireless mobile nodes that connecting with each other without any centralized control or fixed infrastructure. There are some parameters that affect ... -
Measuring the temperature variation along the length of a triple concentric tube heat exchanger
(Universiti Malaysia Perlis (UniMAP)School of Mechatronic Engineering, 2009-04)A triple concentric tube heat exchanger of approximately 4m length is fabricated using stainless steel tubes of 2 inches (5.08cm), 3 inches (7.62cm) and 4 inches (10.16cm) diameter respectively. The three different fluids ... -
Measuring vibration and noise of blower based on different operation modes
(Universiti Malaysia Perlis (UniMAP), 2017-06)Excessive operational period of blower will lead the workers to excessive exposure of vibration and noise. As the vibration and noise exposure continues, the pain may lead to a permanent injury or disability. Several factors ... -
Mechanical and thermal performance of fly ash (FA) geopolymer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research is carried out to study the mechanical and thermal performance of fly ash geopolymer exposed to high temperature. Fly ash (FA) is the waste product that can be the raw material to make geopolymers. The fly ... -
Mechanical and thermal performance of lightweight geopolymers foamed using aluminium powder
(Universiti Malaysia Perlis (UniMAP), 2017-06) -
Mechanical behaviour of concrete made with coarse recycle concrete of aggregates
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This research was attempt to use demolition waste replacement of coarse aggregate to produce concrete. An experiment was carry out to determine the strength of concrete with demolition waste aggregate to compare with the ... -
Mechanical performance of Fibre Reinforced Polymer (FRP)
(Universiti Malaysia Perlis (UniMAP), 2016-06)Composite material is a major technological advancement in the field of material sciences. Composites are applied in many major aspects of engineering, for example automotive, construction, aerospace and many more. Fibre ... -
Mechanical properties of Aluminium (experiment and finite element analysis)
(Universiti Malaysia Perlis (UniMAP), 2016-06)Aluminium are the material that can be failure when the force applied with plastic deformation. Mechanical properties of a material describe how it will be reacting to physical forces. Tensile test is commonly used to ... -
Mechanical properties of Copper Ferrite CuFe₂O₄‐ polymer composite fabricated using 3D printer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)The effect of speed of powder dispenser on the mechanical properties of ABS-CuFe₂O₄ composites was studied. The samples in the experiment were printed by 3D printer which produce three dimensional objects from the digital ... -
Mechanical properties of ductile materials (experiment and finite element analysis)
(Universiti Malaysia Perlis (UniMAP), 2016-06)Tensile test is one of the ways to study how strong a material. By leaving the damaged procedure, tensile test tend to be more accurate to compare it to other similar hardness test. The most of important in mechanical ... -
Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Kenaf/unsaturated polyester composites were prepared with different kenaf fiber loading (1, 2 and 3 layer) and calcium carbonate loading (1 % and 2 %) by using hand lay – up method. The kenaf fiber used was in a fiber mat ... -
Mechanical properties of PLA/HA composite for Coronary Stent application by powder processing
(Universiti Malaysia Perlis (UniMAP), 2016-06)The risen in mortality cause by coronary heart disease (CAD) leads to intervention of procedure such as bypass surgery and percutaneous coronary intervention (PCI) with or without stenting. Nevertheless, the idea of procedure ... -
Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-05)This research is mainly focused on mechanical properties of polyurethane foam filled with kenaf fiber and tyre rubber particles with addition of different amount kenaf loading (2%, 4%, 6% and 8%) and size of tyre rubber ... -
Mechanical properties of steel fiber reinforced concrete with recycled coarse aggregate
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Steel is one of fibres used in fiber reinforced concrete technology. Steel fibres in concrete are help to improves flexural strength and crack resistance. . Today, there are critical shortages of natural resources in ... -
Mechanical studie of chitosan filled recycled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The chitosan filled recycled low density polyethylene (rLDPE) biocomposites were prepared by Z-blade mixer at the temperature 180 °C. The effects of chitosan loading on mechanical properties of the rLDPE/chitosan ...