Show simple item record

dc.contributor.authorShamsul Baharin, Jamaludin, Prof. Dr.
dc.contributor.authorAhmad Latiffi, A. A. T.
dc.contributor.authorKhairel Rafezi, Ahmad
dc.contributor.authorMd. Fazlul, Bari
dc.date.accessioned2010-08-24T04:33:37Z
dc.date.available2010-08-24T04:33:37Z
dc.date.issued2009
dc.identifier.citationInternational Journal of Mechanical and Materials Engineering, vol. 4(2), 2009, pages 208-210en_US
dc.identifier.issn1823-0334
dc.identifier.uriejum.fsktm.um.edu.my/VolumeListing.aspx?JournalID=19
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/9035
dc.descriptionLink to publisher's homepage at http://www.um.edu.my/en_US
dc.description.abstractIn the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the salt spray test, produced a whole rusty surface on the tested specimens (batch 2). The welding joints were subjected to tensile-shearing test in order to determine the strength of the welded joints from ambient and in corrosive environment. Tensile-shear test showed significant differences on the failure load between these two batches where corrosion had affected the surface strength of the welded steel. The results also showed that the highest tensile shear strength is given by the specimen welded using 4kA current at 4 cycles.en_US
dc.language.isoenen_US
dc.publisherUniversity of Malayaen_US
dc.subjectMicrostructuralen_US
dc.subjectMild steelen_US
dc.subjectSpot weldingen_US
dc.subjectTensile shear testen_US
dc.subjectCorrosiveen_US
dc.titleThe influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheetsen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record