Md. Fazlul Bari, Assoc. Prof. Dr.
Browse by
This page provides access to research works by Associate Professor Dr. Md. Fazlul Bari, currently an Associate Professor of School of Materials Engineering, Universiti Malaysia Perlis (UniMAP).
News
Skills and Expertise: Hydrometallurgy
Recent Submissions
-
Palm Ash as an Alternative Source for Silica Production
(EDP Sciences, 2016)Agricultural wastes such as palm ash and rice husk have a possibility to be used as a useful renewable source for the production of silica (SiO2). Extensive researches have been carried out to extract silica from agricultural ... -
Photoelectrocatalytic activity of Zn-loaded RGO-TiO₂ composite coatings on mild steel substrate via DC electrochemical co-deposition
(EDP Sciences, 2014-02)The photoelectrocatalytic activity of Zn-loaded reduced graphene oxide-titania (RGO-TiO₂) composite coatings on mild steel substrate was investigated in detail. Zn-loaded RGO-TiO₂ composite films were prepared by using DC ... -
Extraction of silica from palm ash using organic acid leaching treatment
(Trans Tech Publications, 2014)Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ... -
Extraction of silica from palm ashvia citric acid leaching treatment
(AENSI Publisher All rights reserved, 2013-10)Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ... -
Extraction of silica from palm ash using citric acid leaching treatment: Preliminary result
(Trans Tech Publications, 2013)Large quantities of agricultural wastes such as palm ash and rice husk are found throughout Malaysia, have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive ... -
Kinetic and thermodynamic studies on adsorption of copper ions onto pomelo peel (citrus grandis)
(Trans Tech Publications, 2013)The ability of pomelo peel (PP) as natural adsorbent to remove Cu (II) ions from aqueous solution was investigated. The influence of solution pH, contact time and temperature were evaluated. Cu (II) removal increased as ... -
Preparation and characterization of silica aerogel immobilized with cyanex 301 for extraction of Zn(II)
(Trans Tech Publications, 2013)A new solid phase extractant silica aerogel immobilized with Cyanex 301 {bis(2,4,4- trimethylpentyl) dithiophosphinic acid} (SAWC) was prepared via a sol- gel method and investigated for the extraction of Zn(II) from aqueous ... -
Review of extraction of silica from agricultural wastes using acid leaching treatment
(Trans Tech Publications, Switzerland, 2012-12)Large quantities of agricultural wastes such as palm ash and rice husk are found in Malaysia, have a large possibility to be employed as usefully renewable to produce energy and silica (SiO2). Extensive researches have ... -
Future of nanotube structured cathodes for solid oxide fuel cell
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)The research on fuel cell is in progress with the increasing demand of present day fuel. The performance of solid oxide fuel cell largely depends on cathode materials and microstructures. A lot of effort has been put but ... -
Selective extraction, separation and recovery of Cu(II) in presence of Zn(II) and Ni(II) from leach liquor of waste printed circuit board using microcapsules coated with Cyanex 272
(Springer Verlag, 2012-05)The study was conducted to optimize the selective extraction and recovery of Cu(II) in the presence of Zn(II) and Ni(II) from the leach liquor of waste printed circuit boards (PCBs). The extraction experiments were carried ... -
Microstructure and properties of Co-Cr-Mo alloy as a function of isothermal holding time
(Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)Currently, Co-Cr-Mo alloys become attractive in the field of biomaterials for surgical implants because of their strength, corrosion resistance and biocompatibility. In this work the influence of sintering time on the ... -
NanoDNA chip for the detection of porcine derivatives in halal products
(Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)Pig (Sus scrofa) mitochondrial genome was analyzed for AluI sites by NEB cutter version 2 and REBASE softwares. Out of 66 AluI fragments, five were selected as probes for the construction of porcine mitochondrial DNA ... -
Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering
(Trans Tech Publications, Switzerland, 2011)This research was carried out to fabricate and characterize Co-Cr-Mo (F-75) alloy. The samples have been prepared via solid state sintering. The lab work comprises the mixing of F-75 alloy powder with 2 wt. % of binder. ... -
Solid state sintering of Co-Cr-Mo (F 75): Microstructure and properties
(SIRIM, 2010-11-22) -
Characterization of Ni0.5LiXZn(0.5-X)Fe2O4 synthesized by co-precipitation method
(SIRIM, 2010-11-22) -
Investigate the liberation of copper from waste Printed Circuit Boards (PCBs)
(Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)Nowadays the waste PCBs increasing sharply proportionally the number of personal computers which is 5.7 million in 2005 and the predict amounts, it will be increase to 11.5 Million in 2010 (Unit Perancangan Ekonomi, ... -
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
(University of Malaya, 2009)In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ... -
A study on floatability of copper using Modified Hallimond Tube
(Universiti Malaysia Pahang (UMP), 2009-06-20)The Floatability of copper on the Modified Hallimond tube depend on lots of parameters such as dosage and types of collector, frother, air flow rate, flotation time, and pH value. All of this parameters give different ... -
A study on floatability of copper using modified hallimond tube
(Universiti Malaysia Pahang, 2009-06-20)The Floatability of copper on the Modified Hallimond tube depend on lots of parameters such as dosage and types of collector, frother, air flow rate, flotation time, and pH value. All of this parameters give different ... -
Hydrophobic silica nano-tube immobilized with Cyanex 272 for the extraction of metal ions
(Universiti Malaysia Pahang, 2009-06-20)This paper reports on the synthesis and application of hydrophobic silica nano-tubes immobilized with Cyanex 272 (HBSNC) as a new, inexpensive and easily prepared solid-phase extractant for the extraction of Cu(II), ...
RSS 1.0