Browsing Institute of Nano Electronic Engineering (INEE) (Articles) by Title
Now showing items 65-84 of 206
-
Evaluate the effects of various surface roughness on the tribological characteristics under dry and lubricated conditions for Al-Si alloy
(Scientific Research Publishing Inc. All rights reserved., 2012-07)The effect of surface roughness average of hypereutectic aluminum silicon alloys (with 16 wt% Si) on the friction and wear was investigated. Various surface roughness average (Ra) of different degrees was verified as well ... -
Experimental and theoretical investigations of structural properties of nanostructured Co-doped ZnO films grown by pulsed laser deposition
(Elsevier Ltd., 2012-06-22)The nanostructured Co-doped ZnO films on glass substrates prepared by pulsed laser deposition are fabricated. The effect of doping on the structural properties of ZnO:Co films have been investigated using X-ray diffraction ... -
Experimental determination of the performance of rice husk-carbon nanotube composites for absorbing microwave signals in the frequency range of 12.4-18 GHz
(EMW Publishing, 2013)Composites of rice husks and carbon nanotubes (RHC-NTs) are an innovation in improving the absorption of microwave signals. Rice husks, which are an agricultural waste material, have been found to possess a significant ... -
Extended reliability of gold and copper ball bonds in microelectronic packaging
(World Gold Council, 2013-06)Wire bonding is the predominant mode of interconnection in microelectronic packaging. Gold wire bonding has been refined again and again to retain control of interconnect technology due to its ease of workability and years ... -
External temperature and pressure effects on thermodynamic properties and mechanical stability of yttrium chalcogenides YX(X=S, Se and Te)
(Elsevier B.V., 2013)The full potential linearized augmented plane wave method within the framework of density functional theory is employed to investigate the structural, thermodynamic and elastic properties of the yttrium chalcogenides (YX: ... -
Fabrication and characterization of 50 nm silicon nano-gap structures
(American Scientific Publishers, 2011-04)A simple method for the fabrication of nano-gaps less than 50 nm by using conventional photolithography combined with patterned-size reduction techniques is presented. Silicon material is used to fabricate the nano-gap ... -
Fabrication and characterization of gold nano-gaps for ssDNA immobilization and hybridization detection
(Journal of New Materials for Electrochemical Systems, 2011)We develop a method for fabricating the nano-gaps directly by using just photolithography and wet etching processes without any nano lithography or difficult techniques. It shows that this resolution enhancement allows one ... -
Fabrication and characterization of IDE based sensor through conventional lithography method
(Trans Tech Publications, 2014)This paper mainly illustrate regarding the fabrication process of IDE based sensor for bio-molecular detection process. Material that is utilized in this process is zinc oxide due to bio-compability and elevated electrical ... -
Fabrication and characterization of ZnO thin films by sol-gel spin coating method for the determination of phosphate buffer saline concentration
(Bentham Science Publishers., 2013)The fabrication, characterization and application of nanostructured zinc oxide (ZnO) thin films on interdigitated silver electrodes were described for the determination of phosphate buffer saline (PBS) concentration. The ... -
Fabrication of Amorphous silicon Microgap Structure for Energy Saving Devices
(Universiti Kebangsaan Malaysia, 2011-11-18)We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ... -
Fabrication of amorphous silicon microgap structure for energy saving devices
(Sains Malaysiana., 2012-06)We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ... -
Fabrication of nanostructure based biosensor for biomolecules detection
(Trans Tech Publications, 2014)Lately, nanostructure based biosensor application has drawn a lot attention among fellow researchers because of speciality to detecting cell, tissue and even disease caused by viruses either from humans, animals or ... -
Fabrication of nanowire using ash trimming technique
(Trans Tech Publications, 2013)The paper present a report on fabrication of Nanowire using plasma oxidation, we monitor changes by studying the morphology and Δw/Δh, the study also revealed that the proposed fabrication method could potentially be used ... -
Fabrication of polysilicon nanowires using trimming technique
(AENSI Publications, 2012-04)Recently most researches are more to scaling down the electronic devices and this fact including component, structure and complexity of electronic devices. These matters also include fabrication of nanowires in certain ... -
Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method
(Trans Tech Publications, 2014)A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ... -
Fabrication of silicon nitride ion sensitive field-effect transistor for pH measurement and DNA immobilization/hybridization
(Hindawi Publishing Corporation, 2013)The fabrication of ion sensitive field-effect transistor (ISFET) using silicon nitride (Si3N4) as the sensing membrane for pH measurement and DNA is reported. For the pH measurement, the Ag/AgCl electrode was used as the ... -
First-principle calculations to investigate the elastic and thermodynamic properties of RBRh 3 (R =Sc, y and La) perovskite compounds
(Taylor and Francis Group, 2012-01-20)We have performed first-principle calculations using the full-potential linear augmented plane wave (FP-LAPW) method within density functional theory (DFT) to investigate the structural, elastic and thermodynamic properties ... -
First-principles calculations of the structural, electronic and optical properties of cubic BxGa1−xAs alloys
(Elsevier B.V., 2012-04-15)Density functional calculations are performed to study the structural, electronic and optical properties of technologically important BxGa1−xAs ternary alloys. The calculations are based on the total-energy calculations ... -
First-principles calculations to investigate optical properties of B yAl xIn 1-x-yN alloys for optoelectronic devices
(Elsevier Ltd., 2012-03)First-principles density-functional theory of Full-Potential Linear Augmented Plane Wave (FP-LAPW) within local density approximation (LDA) of the optical properties of B yAl xIn 1- x-yN systems (with x = 0.187 and y = ... -
Fluorescence-signaling aptasensor for ATP and PDGF detection on functionalized diamond surface
(The Electrochemical Society, 2012)An aminated diamond-based aptasensor is presented for adenosine triphosphate (ATP) and platelet-derived growth factor (PDGF) detection. In this work, a signal-off detection method was employed to provide a sensitive, ...