Now showing items 1-20 of 33

    • Properties and behavior of Geopolymer Concrete Subjected to Explosive Air Blast Loading: a review 

      Nurul Aida, Mohd Mortar; Kamarudin, Hussin; Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Ahmad Humaizi, Hilmi; Andrei Victor, Sandu (EDP Sciences, 2017)
      The severe damage to civilian buildings, public area, jet aircraft impact and defense target under explosive blast loading can cause a huge property loss. Most of researcher discusses the topics on design the concrete ...
    • Review on potential of Geopolymer for concrete repair and rehabilitation 

      Warid Wazien, Ahmad Zailani; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd. Razak; Mohd M.A.Z. Remy, Rozainy; Muhammad Faheem, Mohd Tahir; Meor Ahmad Faris, Meor Ahmad Tajudin; Hazamaah, Nur Hamzah (EDP Sciences, 2016)
      Cracking, spalling, surface deterioration, seepage and other concrete damage of the existing infrastructure have raised concern among residents, local authorities and developers. Dealing with concrete infrastructure ...
    • Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Rafiza, Abd Razak; Sandu, Andrei Victor (MDPI AG, 2015)
      This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...
    • A Review on the Manufacturing of Lightweight Aggregates Using Industrial By-Product 

      Nor Aiman, Mahmad; Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Januarti Jaya, Ekaputri; M. A., Faris; Hazamaah, Nur Hamzah (EDP Sciences, 2016-10)
      The waste materials from industrial are one of the concern issues in sustainable development. Recycle and reduce the waste material is one of the strategies to produce the better sustainable system. One of the methods is ...
    • Optimization of NaOH Molarity, LUSI Mud/Alkaline Activator, and Na2SiO3/NaOH Ratio to Produce Lightweight Aggregate-Based Geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Djwantoro, Hardjito; Zarina, Yahya (MDPI AG, 2015-05-21)
      This paper presents the mechanical function and characterization of an artificial lightweight geopolymer aggregate (ALGA) using LUSI (Sidoarjo mud) and alkaline activator as source materials. LUSI stands for LU-Lumpur and ...
    • Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on OPC substrate 

      Warid Wazien, Ahmad Zailani; Bouaissi, Aissa; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abd Razak; Yoriya, Sorachon; Mohd Arif Anuar, Mohd Salleh; Mohd Remy Rozainy, M. A. Z.; Hamzah, Fansuri (MDPI AG, 2020-05)
      This investigative study aims to study the mechanical and morphological properties of fly ash (FA)-based geopolymer paste as a repair material when applied on ordinary Portland cement (OPC) overlay concrete. The first ...
    • Strength, density and water absoprtion of Palm oil boiler ash (POBA) geopolymer brick/IBS brick 

      Zarina, Yahya; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Rafiza, Abd Razak (Trans Tech Publications Ltd., 2016-01)
      Geopolymer or alkali-activated binder is produced by synthesizing aluminosilicate source materials with an alkaline activator solution. This study has been conducted to produce palm oil boiler ash (POBA) geopolymer brick/IBS ...
    • Chemical reactions in the geopolymerisation process using fly ash-based geopolymer: A review 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Mohd Izzat, Ahmad (American-Eurasian Network for Scientific Information (AENSI Publisher), 2011-07)
      The development of our world, demanding the power supply which is produced by combustion of coal. Unfortunately, the million of tons of fly ash and related-products have been generated. To overcome these problems, fly ash ...
    • The relationship of NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator ratio, and curing temperature to the strength of fly ash-based geopolymer 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussin; Khairul Nizar, Ismail; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2011)
      Geopolymer, produced by the reaction of fly ash with an alkaline activator (mixture of Na2SiO3 and NaOH solutions), is an alternative to the use of ordinary Portland cement (OPC) in the construction industry. However, there ...
    • The effect of curing temperature on physical and chemical properties of geopolymers 

      Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Mohammed Amjad, Hussain; Khairul Nizar, Ismail; Zarina, Yahya; Rafiza, Abdul Razak (Elsevier BV, 2011)
      Fly ash-based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, ...
    • Review on the various ash from palm oil waste as geopolymer material 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Advanced Study Center Co. Ltd., 2013)
      The solid waste from palm oil mill industry has been increasing annually where it has been reported that the palm oil waste was produced 4 million tons/years in Malaysia only. Hence, the solution to overcome the problems ...
    • Effect of palm slag filler size on the mechanical and wear properties of brake pad composites 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (American Scientific Publishers, 2013-01)
      Particle size of filler and other material that involved in brake pad composites are expected to be able to strongly influence the wear properties and performance. Palm slag as a filler in brake pad was investigated in ...
    • Malaysian Foxtail grass - A potential source of natural/agro fibre for polymer composite panel 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2013)
      Foxtail grass, also known as 'rumput bulu' by the local people, is one of the fast growing grasses abundantly available all over Malaysia. A full grown Foxtail grass attains a height of about 0.5 - 1.5 meters. The fibres ...
    • Study on radioactivity components, water quality and microstructure characteristic of volcano ash as geopolymer artificial aggregate 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Sandu, Ion; Djwantoro, Hardjito, Dr.; Zarina, Yahya (SYSCOM 18, 2013-06)
      The assessments of radioactivity, water qualitytesting and microstructure characteristic of volcano ash have been examined. The measurement of the 226Ra, 232Th, 40K, and 238U were carried out using radioactive concentration ...
    • Comparison of original and sintered LUSI mud from East Java, Indonesia as raw material for making a geopolymer 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (American Scientific Publishers, 2013-01)
      This paper presents the characterization of LUSI mud from East Java, Indonesia, as a potential raw material for making a geopolymer. Two types of LUSI mud were analyzed, i.e., original LUSI mud and LUSI mud that had been ...
    • Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature 

      Mohd Mustafa Al-Bakri, Abdullah; Omar A., Abdulkareem; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2013)
      Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...
    • Microstructure study on volcano ash geopolymer aggregate at different sintering temperature 

      Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Djwantoro, Hardjito, Dr.; Wan Hamidon Wan Badaruzzaman, Ir. Dr.; Zarina, Yahya (Trans Tech Publications, 2014)
      Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...
    • Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2014)
      Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
    • Influence of dolomite on the mechanical properties of boiler ash geopolymer paste 

      Zarina, Yahya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Trans Tech Publications, 2014)
      The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...
    • Reviews on the different sources materials to the geopolymer performance 

      S. N. Fifinatasha; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak; Liyana, Jamaludin (AENSI Publisher All rights reserved, 2013-10)
      Geopolymer is manufactured from the aluminosilicate source material in example fly ash, silica fume, kaolin, ground granulate blast slag (GGBS), boiler ash and volcano ash reactivated via alkaline solution. But the different ...