Now showing items 1-5 of 5
Characterization of LUSI mud volcano as geopolymer raw material: A review
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...
Fly ash-based geopolymer lightweight concrete using foaming agent
(MDPI, Basel, Switzerland., 2012-06)
In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium ...
Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature
(Trans Tech Publications, 2013)
Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...
Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze
(Trans Tech Publications, 2014)
Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System
(MDPI AG, 2015)
This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...