Mohd Mustafa Al Bakri Abdullah, Prof. Dr.: Recent submissions

Now showing items 201-220 of 265

    • Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain; Luqman, Musa; Khairul Nizar, Ismail, Prof. Madya Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Cheng, Yong Heah (Scientific.Net/Trans Tech Publications, 2012-12)
      The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...

    • Potential application of palm ash as a raw materials in production of green glass 

      Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki; Murizam, Darus; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Scientific.Net/Trans Tech Publications, 2012-12)
      Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...

    • Strength and microstructural properties of mechanically-activated kaolin geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain; Luqman, Musa; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (Trans Tech Publications, 2012-12)
      Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...

    • Application of clay - based geopolymer in brick production: a review 

      Muhammad Faheem, Mohd Tahir; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Mohammed, Binhussain; Che Mohd Ruzaidi, Ghazali; Mohd Izzat, Ahmad (Trans Tech Publications/Scientific.Net, 2012-12)
      This paper reviews and summarizes the current knowledge and application of clay as a geopolymer material in production of geopolymer brick. As we understand, the nature of source materials give a significant impact to the ...

    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...

    • The processing, characterization, and properties of fly ash based geopolymer concrete 

      Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Advanced Study Center Co. Ltd, 2012)
      In recent years, attempts to increase the utilization of fly ash as a replacement for ordinary Portland cement (OPC) in concrete have increased in significance. Geopolymer concrete does not need the presence of Portland ...

    • Characterization of LUSI mud volcano as geopolymer raw material: A review 

      Rafiza, Abdul Razak; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Djwantoro, Hardjito, Dr. Ir.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper summarizes the current knowledge about the potential of LUSI mud volcano, East Java, Indonesia as a raw material in geopolymer. Previous experimental study shows that the LUSI mud has a good performance when 5% ...

    • Characterization of LUSI mud volcano as geopolymer raw material 

      Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak; Djwantoro, Hardjito, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2012)
      The mud of mud volcano samples were collected from an eruption site named 'LUSI' (Lumpur "mud" -Sidoarjo), East Java, Indonesia for characterization. Analysis showed that, the major constituents of mud are SiO 2 and Al 2O ...

    • Correlation between Na 2SiO 3/NaOH ratio and fly ash/alkaline activator ratio to the strength of geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Zarina, Yahya; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Geopolymer requires an alkaline activator to induce it pozzolanic property and to accelerate the geopolymerisation process. The geopolymerisation process occurs due to the mixing of fly ash, sodium silicate and sodium ...

    • Microstructure study on optimization of high strength fly ash based geopolymer 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2012)
      The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...

    • Effect of alkali concentration on mechanical properties of kaolin geopolymers 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Husain; Luqman, Musa; Khairul Nizar, Ismail; Liew, Yun Ming (Foundation for Materials Science and Engineering, 2012)
      Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...

    • Effect of mechanical activation on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Liew, Y. M. (Trans Tech Publications, 2012)
      Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...

    • Feasibility of producing wood fibre-reinforced geopolymer composites (WFRGC) 

      Mohd Mustafa Al Bakri, Abdullah; Mohd Izzat, Ahmad; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Liyana, Jamaludin (Trans Tech Publications, 2013)
      Wood fibres have long been known as a fibre reinforcement for concrete. Due to its availability and low production cost, this natural fibre has been used in less developed country where conventional construction materials ...

    • Mechanical properties of Sn-0.7Cu/Si 3N 4 lead-free composite solder 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al-Bakri, Abdullah; Muhammad Hafiz, Zan Hazizi; Flora, Somidin; Noor Farhani, Mohd Alui; Zainal Arifin, Ahmad, Prof. (Elsevier B.V., 2012-10)
      The use of reinforcing high performance ceramic particulates in monolithic lead-free solder is one way to improve the service temperature and mechanical behavior of a solder joint. In this study, various compositions of ...

    • Lightweight fly ash-based geopolymer concrete 

      Omar A., Abdulkareem; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr. (Trans Tech Publications, 2013)
      The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...

    • Three dimensional simulation of thermal pad using nanomaterial, nano-silver in semiconductor and electronic component application 

      Mazlan, Mohamed; Rahim, Atan, Prof. Madya Dr.; Mohd Mustafa Al Bakri, Abdullah; Muhammad Iqbal, Ahmad; Mohd Huzaifah, Yusoff; Fathinul Najib, Ahmad Saad (Trans Tech Publications, 2013)
      Thermal pad is new technology in this world that been used in PLCC in order to reduce junction temperature to the minimum level in electronic components. In electronic industry, the electronic components that exceed 70°C ...

    • Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; cheng, Yong Heah (Trans Tech Publications, 2012-07)
      This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...

    • Influence of solidification process on calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Trans Tech Publications, 2012-02)
      This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...

    • Processing and characterization of calcined kaolin cement powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-05)
      Abstract This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...

    • Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-12)
      This paper investigates the effect of S/L and alkali activator ratios on the synthesis of geopolymeric powder. Geopolymeric powder was synthesized by applying geopolymerization process. By adopting the concept of "just ...