Show simple item record

dc.contributor.authorShayfull Zamree, Abd. Rahim
dc.contributor.authorMuhammad Syahril, Bahari
dc.contributor.authorSiti Aishah, Adam
dc.contributor.authorMohd. Nasir, Mat Saad
dc.contributor.authorNooraizedfiza, Zainon
dc.date.accessioned2014-06-16T07:01:13Z
dc.date.available2014-06-16T07:01:13Z
dc.date.issued2013-03
dc.identifier.citationInternational Review of Mechanical Engineering, vol. 7(3), 2013, pages 512-518en_US
dc.identifier.issn1970-8734
dc.identifier.urihttp://www.praiseworthyprize.com/IREME-latest/IREME_vol_7_n_3.html
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/35573
dc.descriptionLink to publisher's homepage at http://www.praiseworthyprize.comen_US
dc.description.abstractNowadays, the trend of consumer products designed is getting smaller and most of cover is made from plastic which was produced by using injection molding process. Thus, the demand of thin shallow plastic parts in global industries is increasing today. In addition, manufacturing engineers have difficulties to control the parameters during processing the 1 mm thickness of the thin shallow parts where the warpage defect is the common issue especially for the thin parts. Therefore this study is performed purposely to evaluate the performance of conformal cooling channels compared to the straight drilled cooling channels in order to minimize the warpage on the thin shallow parts. The type of gating systems used in this study is side gate, which is commonly gate in 2-plate mold. The results from simulation through Autodesk Moldflow Insight (AMI) 2013 are analyzed by using Taguchi Method and Analysis of Variance (ANOVA). Results from this study show that conformal cooling channels are able to improve the quality of the molded parts in term of warpage compared to the conventional straight drilled cooling channels. This is beneficial for the molding industries especially for the precise parts.en_US
dc.language.isoenen_US
dc.publisherPraise Worthy Prize S.r.l.en_US
dc.subjectAnalysis of variance (ANOVA)en_US
dc.subjectConformal cooling channels and injection moldingen_US
dc.subjectTaguchien_US
dc.subjectThin shallow shellen_US
dc.titleImproving warpage on thin shallow parts in two-plate moulds with conformal cooling channelsen_US
dc.typeArticleen_US
dc.contributor.urlshayfull@unimap.edu.myen_US
dc.contributor.urlsyahrilbahari@unimap.edu.myen_US
dc.contributor.urlaishahadam@unimap.edu.myen_US
dc.contributor.urlnasirsaad@unimap.edu.myen_US
dc.contributor.urlnooraizedfiza@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record