Browsing Mazlee Mohd Noor, Assoc. Prof. Dr. by Issue Date

Now showing items 1-20 of 39

    • Bahan NANO dan aplikasinya 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Prof. Madya Dr. (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-09)

    • Cobalt Implant Composite (CIC) 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi; Mazlee, Mohd. Noor (Ministry of Higher Education (MOHE), 2005-09-30)
      Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique.

    • Enviro Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Madya Dr.; Che Mohd. Ruzaidi, Ghazali; Chek Idrus, Omar (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      Aluminium has been recycled since the days it was first commercially produced and today recycled aluminium accounts for one-third of global aluminium consumption worldwide.

    • Recycled Aluminium Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Murizam, Darus (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Recycle Aluminium Composite Pulley was an environmental-friendly pulley from innovative recycle aluminium composite materials. This pulley was fabricated by using recycled aluminium alloy from automotive component reinforced ...

    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.

    • Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Assoc. Prof. Dr.; Kamarudin Hussin, Kol. Prof. Dato’ Dr.; Shaiful Rizam Shamsudin; K. Ismail (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      The microstructure and hardness of A356/stainless steel composite via gravity die casting technique were evaluated. Both nearly completed bonding and incomplete bonding was seen at the stainless steel wire- A356 matrix ...

    • The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy 

      Khairel Rafezi Ahmad; Wong Jing Lee; Ruhiyuddin Mohd Zaki; Mazlee Mohd Noor; Mohd Fitri Mohamad Wahid; Shaiful Rizam Shamsudin; Shamsul Baharin Jamaludin, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...

    • Effect of Colloidal SIO2 Content on the Morphology of Coated Ceramic Particles 

      Shaiful Rizam Shamsudin; Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Assoc. Prof. Dr.; Mohd Fitri Mohamad Wahid; Ruhiyuddin Mohd Zaki; Khairel Rafezi Ahmad; A.G.B. Syamsul; M. Harun; Y. Hafizal (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      Coated structure on fly ash particles was produced by liquid stirring of colloidal SiO2. Morphological study by means of scanning electron microscope has consent to controlling the present of outer layer by the addition ...

    • Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Science Publications, 2008)
      The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ...

    • Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin; Kamarudin Hussin; Shaiful Rizam Shamsudin; K. Ismail; M.F. Abdullah (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ...

    • Development of a Lid Sealed furnace for the production of Magnesium alloys 

      Shaiful Rizam, Shamsudin; Azmi, Kamardin; Mohd Nazree, Derman; Shamsul Baharin, Jamaludin; Azremi, Abdullah Al Hadi; A.M.H. Firdaus; Mazlee, Mohd Noor; C.I. Mahdi; Abdul Razak, Daud; Roslinda, Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ...

    • Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy 

      Mazlee, Mohd Noor; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shaiful Rizam, Shamsudin (University of Malaya, 2009)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ...

    • E-nose for basal stem rot detection 

      Ali Yeon, Md Shakaff, Prof. Dr.; Mazlee Noor, Ahmad. Dr.; Marni Azira, Markom; Abdul Hamid, Adom; Wahyu, Hidayat; Abu Hassan, Abdullah; N., Ahmad Fikri (Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2009-07)
      An electronic nose is an intelligent device, able to mimic human olfaction functions and may be used for detection, recognition and classification of volatile compounds and odours. An e-nose consists of an array of ...

    • The effects of autocatalyst copper coating of SiCp on the microstructure of CuSiCp composites 

      Azmi, Kamardin; Mohd Nazree, Derman; Shaiful Rizam Shamsudin; Mazlee, Mohd Noor; J.A.H., Iqwan (Universiti Malaysia Perlis, 2009-12-01)
      In this paper, the autocatalyst copper coating (ACC) of silicon carbide particle (SiCp) was performed after a sequence of surface treatment, sensitization and surface activation processes. The ACC process was operated ...

    • The effects of solutionizing temperatures on microstructures of as-received A357 alloy 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Shaiful Rizam, Shamsuddin; Mohabattul Zaman, SNS Bukhari; Khairel Rafezi, Ahmad; Raudhah, Othman (Universiti malaysia Perlis, 2009-12-01)
      Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ...

    • The effects of welding current and welding duration on the shear strength of spot welded austenitic stainless steel 

      Shamsul Baharin, Jamaludin; Ooi, Woei Ming; Mazlee, Mohd Noor; Khairel Rafizi, Ahmad (Universiti Malaysia Perlis, 2009-12-01)
      Introduction: Resistance spot welding is commonly employed in the fabrication of sheet metal assembly. It can be applied to join metals such as low carbon steel, nickel, aluminum, titanium, copper alloy, stainless steel ...

    • Potentiodynamic polarization of Mg-0.22ca alloys containing minor element of Aluminium 

      Shaiful Rizam, Shamsudin; Mohd Nazree, Derman; C.I., Mahdi; Azmi, Kamardin; Abd. Razak, Daud; Mazlee, Mohd Noor; A.M.H., Firdaus; G., Sasirehka (Universiti Malaysia Perlis, 2009-12-01)
      Mg alloys played a significant role in replacing the existing sacrificial anodes. To maintain the negative potential and its capability in preventing corrosion, Ca and Al was added as alloying elements. Polarization curves ...

    • Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Slovak Academy of Sciences, 2010-03-01)
      The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ...

    • Development of coconut fiber with the addition of fly ash for cement panel application in construction 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...

    • Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Ayusnida, S. (SIRIM, 2010-11-22)