Browsing Mazlee Mohd Noor, Assoc. Prof. Dr. by Title

Now showing items 2-21 of 40

    • Cobalt Implant Composite (CIC) 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi; Mazlee, Mohd. Noor (Ministry of Higher Education (MOHE), 2005-09-30)
      Cobalt implant composite (CIC) was fabricated in KUKUM by powder metallurgy technique.

    • Comparison of dynamic mechanical properties of non-superheated and superheated A357 alloys 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Slovak Academy of Sciences, 2010-03-01)
      The influence of superheat treatment on the microstructure and dynamic mechanical properties of A357 alloys has been investigated. The study of microstructure was performed by optical microscope. Dynamic mechanical ...

    • Compressive strength and crack propagation of cement composites reinforced coconut fibre 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Medwell Journals, 2012)
      This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ...

    • Damping properties of A357 alloys and A357-stainless steel composites fabricated under different conditions 

      Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2010)
      The lab scale gravity casting technique was used to produce alloy specimens of nonsuperheated A357 alloy, superheated A357 alloy and composite specimens of superheated A357-0.5 and 1.0 wt.% stainless steel composites. ...

    • Development and properties of coconut fiber reinforced composite cement with the addition of fly ash 

      Nur Izzati, Muhd Nadzri; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr. (Taylor and Francis, 2012)
      In this paper, the effectiveness utilization of agricultural wastes and industrial wastes in the composite cement has been studied in terms of physical and mechanical properties. Twenty weight percent of fly ash and 80 wt.% ...

    • Development of a Lid Sealed furnace for the production of Magnesium alloys 

      Shaiful Rizam, Shamsudin; Azmi, Kamardin; Mohd Nazree, Derman; Shamsul Baharin, Jamaludin; Azremi, Abdullah Al Hadi; A.M.H. Firdaus; Mazlee, Mohd Noor; C.I. Mahdi; Abdul Razak, Daud; Roslinda, Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ...

    • The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour 

      Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Nur Izzati, Muhd Nadzri (Trans Tech Publications, 2013)
      This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ...

    • Development of coconut fiber with the addition of fly ash for cement panel application in construction 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ...

    • Different concentration of Al(No₃)₃ In Zro₂/Al₂o₃ double layer coating steel prepared by electrolytic method 

      Siti Hawa, Mohamed Salleh; Mohd Nazree, Derman, Dr.; Mohd Zaidi, Omar; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
      Stainless steels, such as 440C steel are commonly used for engineering applications. The high carbon contents of this steel have significantly been attributed to low corrosion resistance properties. Surface modification ...

    • E-nose for basal stem rot detection 

      Ali Yeon, Md Shakaff, Prof. Dr.; Mazlee Noor, Ahmad. Dr.; Marni Azira, Markom; Abdul Hamid, Adom; Wahyu, Hidayat; Abu Hassan, Abdullah; N., Ahmad Fikri (Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2009-07)
      An electronic nose is an intelligent device, able to mimic human olfaction functions and may be used for detection, recognition and classification of volatile compounds and odours. An e-nose consists of an array of ...

    • Effect of Colloidal SIO2 Content on the Morphology of Coated Ceramic Particles 

      Shaiful Rizam Shamsudin; Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Assoc. Prof. Dr.; Mohd Fitri Mohamad Wahid; Ruhiyuddin Mohd Zaki; Khairel Rafezi Ahmad; A.G.B. Syamsul; M. Harun; Y. Hafizal (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      Coated structure on fly ash particles was produced by liquid stirring of colloidal SiO2. Morphological study by means of scanning electron microscope has consent to controlling the present of outer layer by the addition ...

    • Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Rahman, W (Praise Worthy Prize, 2013)
      The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the ...

    • Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Muhammad Rifki, Ismail; Khairel Rafezi, Ahmad, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...

    • The effects of autocatalyst copper coating of SiCp on the microstructure of CuSiCp composites 

      Azmi, Kamardin; Mohd Nazree, Derman; Shaiful Rizam Shamsudin; Mazlee, Mohd Noor; J.A.H., Iqwan (Universiti Malaysia Perlis, 2009-12-01)
      In this paper, the autocatalyst copper coating (ACC) of silicon carbide particle (SiCp) was performed after a sequence of surface treatment, sensitization and surface activation processes. The ACC process was operated ...

    • Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites 

      Roshasmawi, Abdul Wahab; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Khairul Nizar, Ismail, Dr. (Trans Tech Publications, 2013)
      In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ...

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...

    • The effects of solutionizing temperatures on microstructures of as-received A357 alloy 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Shaiful Rizam, Shamsuddin; Mohabattul Zaman, SNS Bukhari; Khairel Rafezi, Ahmad; Raudhah, Othman (Universiti malaysia Perlis, 2009-12-01)
      Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ...

    • The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ...

    • The effects of welding current and welding duration on the shear strength of spot welded austenitic stainless steel 

      Shamsul Baharin, Jamaludin; Ooi, Woei Ming; Mazlee, Mohd Noor; Khairel Rafizi, Ahmad (Universiti Malaysia Perlis, 2009-12-01)
      Introduction: Resistance spot welding is commonly employed in the fabrication of sheet metal assembly. It can be applied to join metals such as low carbon steel, nickel, aluminum, titanium, copper alloy, stainless steel ...

    • Enviro Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Madya Dr.; Che Mohd. Ruzaidi, Ghazali; Chek Idrus, Omar (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      Aluminium has been recycled since the days it was first commercially produced and today recycled aluminium accounts for one-third of global aluminium consumption worldwide.