Now showing items 49-68 of 88

    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Fazlul, Bari (Universiti Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...
    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...
    • Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Ayusnida, S. (SIRIM, 2010-11-22)
    • Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment 

      Nur Farhana, Hayazi; Mazlee, Mohd Noor, Dr.; Shaiful Rizam, Shamsudin; Nur Farhana, Hayazi; Tan, Alvin Yin Zhen (Trans Tech Publications, 2013)
      Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...
    • Kayan 1: a Particle Board from Rice Husk 

      Suhardy, Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohd Nazry, Salleh; Farizul Hafiz, Kassim; Saiful Azhar, Saad; Tengku Nadzlan, Tengku Ibrahim; Wan Su, Haron; Mohamed Zulkali, Mohamed Daud, Prof. Madya Dr. (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.
    • KUKUM Artificial Marble 

      Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Mohd. Sobri, Idris; Mohd. Nazry, Salleh (Malaysian Invention and Design Society (MINDS), 2005-05-19)
      KUKUM Artifcial Marble based on polymer resin (thermoset or thermoplastic) and dolomite to create an artificial material that outperform and look like natural marble or tile physically, thermally and mechanically.
    • Mechanical properties and fracture behaviour of coconut fibre-based green composites 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
      This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...
    • Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2013)
      The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ...
    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...
    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...
    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.
    • The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy 

      Khairel Rafezi Ahmad; Wong Jing Lee; Ruhiyuddin Mohd Zaki; Mazlee Mohd Noor; Mohd Fitri Mohamad Wahid; Shaiful Rizam Shamsudin; Shamsul Baharin Jamaludin, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...
    • Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy 

      Mazlee, Mohd Noor; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shaiful Rizam, Shamsudin (University of Malaya, 2009)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ...
    • Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin; Kamarudin Hussin; Shaiful Rizam Shamsudin; K. Ismail; M.F. Abdullah (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ...
    • Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Science Publications, 2008)
      The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ...
    • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
      Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...
    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...
    • Microstructure and microhardness properties of Fe-Cr-Al2O3 composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, H.; Zainal Arifin, A. (Universiti Putra Malaysia (UPM), 2010)
      The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ...
    • Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin (Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
      The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...
    • Microwave sintering of pure iron with addition of stearic acid as binder 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)
      The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...