Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Title
Now showing items 52-71 of 87
-
Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment
(Trans Tech Publications, 2013)Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ... -
Kayan 1: a Particle Board from Rice Husk
(Malaysian Invention and Design Society (MINDS), 2007-05-18)In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press. -
KUKUM Artificial Marble
(Malaysian Invention and Design Society (MINDS), 2005-05-19)KUKUM Artifcial Marble based on polymer resin (thermoset or thermoplastic) and dolomite to create an artificial material that outperform and look like natural marble or tile physically, thermally and mechanically. -
Mechanical properties and fracture behaviour of coconut fibre-based green composites
(Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ... -
Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites
(Trans Tech Publications, 2013)The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ... -
Mechanical properties and wear behavior of brake pads produced from palm slag
(Trans Tech Publications, 2012)Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ... -
Mechanical properties of dissimilar welds between stainless steel and mild steel
(Trans Tech Publications, 2013)Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ... -
Metal Implant
(Malaysian Invention and Design Society (MINDS), 2006-05-19)This research product is cobalt-chromium metal implant produced by powder metallurgy technique. -
The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ... -
Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy
(University of Malaya, 2009)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ... -
Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ... -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
(Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ... -
Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution
(Technical University of Košice, 2014)Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ... -
Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite
(Trans Tech Publications (TTP), 2013)A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ... -
Microstructure and microhardness properties of Fe-Cr-Al2O3 composites
(Universiti Putra Malaysia (UPM), 2010)The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ... -
Microwave sintering of pure iron with addition of stearic acid as binder
(Trans Tech Publications, 2012)The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ... -
The need to intensify research efforts in the alternative to lead shot
(Trans Tech Publications, 2014)The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ... -
Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles
(Trans Tech Publications, 2014-01)Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ... -
Oxide semiconductors for solar to chemical energy conversion: nanotechnology approach
(Institute for Ionics, 2014)The present work considers the application of oxide semiconductors in the conversion of solar energy into the chemical energy required for water purification (removal of microbial cells and toxic organic compounds from ... -
Physical properties of FG HAP-F75 fabricated by powder metallurgy
(Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)Functional graded (FG) HAP-F75 was prepared by powder metallurgy technique. Three layers of functional graded HAP-F75 was fabricated using single punch hydraulic press. The fabrication technique consists of mixing, pressing ...