Optimal coefficient of friction onartificial knee joint contact surfaces
Date
2013Author
Mohd Hafis, Sulaiman
Nur Farahana, Ramli
Mohd Ridzuan, Mohd Jamir
Nur Adlina, Mohd Takhiudin
Metadata
Show full item recordAbstract
Wear generated by the presence of frictiononknee joint contact surfaces can cause debris, which may lead to failure of the artificial knee joint. In this study, the effects of friction coefficients occur on the knee joint contact surfaces were examined by Finite Element (FE) method. The knee joint was modelled to represent the contact surfaces between femur, meniscus and tibia. The measured angle from 0° to 15° was applied to analyze contact stresses for normal walking condition. It was found that the position angle of the knee joint at 10°offers the maximum value of contact pressure and shear compared to other knee joint position angles.Therefore, further examination was carried out and the FE results showed thattheoptimal friction coefficient was within the range of 0.1 and 0.15.
URI
http://www.scientific.net/AMR.716.565http://dspace.unimap.edu.my:80/dspace/handle/123456789/33125