Show simple item record

dc.contributor.authorNorshah Afizi, Shuaib
dc.contributor.authorMuhamad Nasir, Murad
dc.contributor.authorMohd. Fathullah, Ghazli @ Ghazali
dc.contributor.authorShayfull Zamree, Abd Rahim
dc.contributor.authorMuhamad Saifuldin, Abdul Manan, Dr.
dc.date.accessioned2014-02-05T09:59:50Z
dc.date.available2014-02-05T09:59:50Z
dc.date.issued2012
dc.identifier.citationInternational Review of Mechanical Engineering, vol. 6(1), 2012, pages 11-16en_US
dc.identifier.issn1970-8734
dc.identifier.urihttp://www.praiseworthyprize.com/IREME-latest/IREME_vol_6_n_1.html#Warpage_Analyses_on_Thin_Plate_in_Three-Plate_Mold_by_Taguchi_Method_and_Analysis_of_Variance_(ANOVA)_for_PC,_ABS_and_PC/ABS
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/31738
dc.descriptionLink to publisher's homepage at http://www.praiseworthyprize.com/en_US
dc.description.abstractEvery injection molding parameter have its own influence towards the quality of an injection-molded part. Temperature, pressure and time are main parameters that typically highlighted in controlling the warpage defect of the part. This study is performed to investigate the influence of mold surface temperature, core and cavity temperature on warpage defect of a thinshallow part. The warpage results are obtained using Taguchi Method and optimized using Analysis of Variance (ANOVA) simulated in two experiments using Moldflow software. Confirmation run of best setting for experiment 2 which considers core temperature and cavity temperature resulted to be the more effective than considering only mold surface temperature in experiment 1. It is concluded that by considering core and cavity as the mold temperature, the warpage defect can be minimized up to 79.9%.en_US
dc.language.isoenen_US
dc.publisherPraise Worthy Prize S.r.l.en_US
dc.subjectInjection moldingen_US
dc.subjectMold temperatureen_US
dc.subjectTaguchi methoden_US
dc.subjectThin shallowen_US
dc.subjectWarpageen_US
dc.titleThe influence of different mold temperature on warpage in a thin shallow injection molding processen_US
dc.typeArticleen_US
dc.contributor.urlnorshahafizi@unimap.edu.myen_US
dc.contributor.urlmnasir@unimap.edu.myen_US
dc.contributor.urlfathullah@unimap.edu.myen_US
dc.contributor.urlshayfull@unimap.edu.myen_US
dc.contributor.urlm.saifuldin@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record