Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 95-114 of 383
-
The effect of curing time on electrical resistivity, mechanical characteristics and microstructure behavior of graphene conductive ink
(Universiti Malaysia Perlis (UniMAP), 2021-08)Nowadays graphene conductive ink (CI) are expected to be widely used for various automotive safety electronic equipment in the future. Graphene has a potential advantage such as high electrical conductivity and thermal ... -
Effect of deposition direction on the properties of silicon layers fabricated from recycled silicon powder
(Universiti Malaysia Perlis (UniMAP), 2019-04)In this research, the recycled silicon (RSi) nanopowder of 50 nm diameter was used to fabricate Silicon Microwires (SiMWs) arrays using the Cold Spraying Technique (CST). In addition, Silicon Thin Films (SiTFs) of 2μm ... -
The Effect of Dielectric Surface Modification and Heat-treatment on the Performance of Rubrene based Organic Field-effect Transistor
(Universiti Malaysia Perlis (UniMAP), 2019-01)In this work, bottom gate top contact structured organic field-effect transistors (OFETs) were fabricated using Rubrene as active material and SiO2 as the dielectric on n-type silicon wafer by thermal evaporation method. ... -
Effect of discharge power on the properties of GaN thin films on AlN-(002) prepared by magnetron sputtering deposition
(Universiti Malaysia Perlis (UniMAP), 2020-07)Aluminum nitride (AlN) and gallium nitride (GaN) thin films were grown on silicon (Si) substrates using the conventional RF magnetron sputtering plasma deposition system. The growth rate of GaN increased as the deposition ... -
The effect of graphene nanoplatelets filler size on the electrical and mechanical fatigue properties of conductive epoxy composites
(Universiti Malaysia Perlis (UniMAP), 2021-10)Graphene nanoplatelets (GNPs) have exceptional electrical and mechanical properties that can be used as a filler for conductive polymer. However, the size of the GNP can affect the conductivity of the conductive polymer ... -
The effect of inter laminate layer on flexural strength for unsaturated polyester resin reinforced hybrid fabric composite
(Universiti Malaysia Perlis, 2020-01)The present study aims to examine the effects quality, sequence and direction of the layers for three types of fibers: orthogonal glass fibers, randomized glass fibers, short carbon fiber cut on the bending test using a ... -
Effect of Iron (111) Oxide (Fe2O3) as an additive and substitution of quartz with POFA on physico-mechanical properties of Porcelain
(Universiti Malaysia Perlis (UniMAP), 2019-04)Porcelain tile is a translucent ceramic material developed from the mixture of clay, feldspar and quartz. Its excellent functional and technical properties such as low water absorption, low porosity, stain resistance; high ... -
Effect of KOH molarity on structure, morphology, and optical properties of flower-like CuO nanostructures synthesized by ultrasonic-assisted precipitation method
(Universiti Malaysia Perlis (UniMAP), 2021-04)This paper reports the effect of KOH molarity variation on structure, morphology, and optical properties of CuO nanostructures synthesized by ultrasonic-assisted precipitation method. The results of the XRD analysis showed ... -
Effect of Laser Energy on the Structure of Ni46–Ti50–Cu4 Shape-Memory Alloy
(Universiti Malaysia Perlis (UniMAP), 2018-10)The structural and physical properties of nickel–titanium–copper shape-memory alloy and the effect of laser irradiation on the alloy were investigated in this study. The alloy was prepared using the powder metallurgy method. ... -
Effect of laser parameters on the surface cleaning of galvanised steel by laser engraving process
(Universiti Malaysia Perlis (UniMAP), 2021-08)Laser cleaning is a method of removing layers of material from a surface by using laser irradiation. The energy from the laser provides a textured pattern on the melting surface, as well as colour changes and variations ... -
Effect of light intensity on indoor temperature and air velocity: a simulation study
(Universiti Malaysia Perlis (UniMAP), 2022-03)It is essential to understand the factors influencing thermal responses to improve human comfort and properly reduce energy consumption. It has been confirmed that parameters unrelated to the thermal environment can ... -
Effect of milling time on the microstructure and dielectric properties of chitosan nanopowder
(Universiti Malaysia Perlis, 2020-01)The effect of milling time on the microstructure of chitosan nanopowder had been investigated. This study fabricated chitosan nanopowder via ball milling at different milling time. The milling time used were 0, 60, 180 and ... -
Effect of monomers for the synthesis of chitosan-based hydrogel
(Universiti Malaysia Perlis (UniMAP), 2021-04)Artificial skin is introduced to treat thermal injuries and chronic skin wounds to prevent bacterial infection and water loss. It significantly reduced morbidity and mortality of skin wounds. However, it has limitations ... -
Effect of nanoparticles and fibers types on hybrid blend composite materials behavior of epoxy and phenol-formaldehyde
(Universiti Malaysia Perlis, 2020-01)Phenol-formaldehyde resin was mixed with epoxy resin in different proportions to form a hybrid mixture of composite materials. It was reinforced with carbon fibers, glass fibers, Kevlar fibers, magnesium oxide and zirconia ... -
The effect of pineapple leaf fiber as a filler in polymer matrix composite for interior part in automotive
(Universiti Malaysia Perlis (UniMAP), 2021-08)Recently, many natural fibers such as sisal, banana, kenaf, oil palm and jute have been used as reinforcement in the thermoplastic composite. Furthermore, the process of compounding materials between natural fiber and ... -
The effect of porous materials on temperature drop in a standing wave thermoacoustic cooler
(Universiti Malaysia Perlis (UniMAP), 2022-03)Thermoacoustics is a principle of sciences that offers an alternative solution for cooling system with a technology that is green and sustainable. The thermoacoustic energy conversion takes place mostly within the area of ... -
Effect of quartz replacement with Palm Oil Fuel Ash (POFA) for triaxial porcelain composition of 50%: 40%: 10%
(Universiti Malaysia Perlis (UniMAP), 2022-01)Palm oil fuel ash (POFA) is a waste material disposed by the palm oil industries after palm oil shell, kernel and fiber are burnt in the industries for the process of electricity generation. Triaxial porcelain (50% clay, ... -
The effect of seeding method on the growth of zinc oxide nanorods
(Universiti Malaysia Perlis (UniMAP), 2023-01)The paper presents the investigation of the method of seeding process for the growth of zinc oxide (ZnO) nanorods (NRs) on the glass substrate as an electron transport layer (ETL) for solar cells. The ZnO NRs were grown ... -
The effect of silver particles on the synthesis and characterization of polystyrene/Silver (Ps/Ag) nanocomposites for carbonaceous materials
(Universiti Malaysia Perlis (UniMAP), 2020-04)Polymer nanocomposites containing inorganic fillers like metallic particles dispersed in polymer matrices are of great interest for optical, electronics and dielectric applications. Polymer/inorganic such as polystyrene/silver ... -
The effect of sintering temperature on structure and electrical properties of CaTiO3 synthesized from hen’s eggshell via hydrothermal process
(Universiti Malaysia Perlis (UniMAP), 2019-07)This article reports the effect of the sintering temperature on structural and electrical properties of CaTiO3 synthesized via a hydrothermal route from hen’s eggshell waste as a calcium source. The eggshell-derived powder ...