Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 422-441 of 454
-
Taguchi Method for p-MOS threshold voltage optimization with a gate length of 22nm
(Universiti Malaysia Perlis (UniMAP), 2023-01)This paper describes the virtual design of a 22nm gate length p-type metal oxide semiconductor, PMOS. Silvaco, TCAD tools were used to fabricate the device design and to characterize the device’s electrical properties. ... -
Technique to enhance the bandwidth of a very thin Artificial Magnetic Condutor (AMC)
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper introduces a technique to enhance the bandwidth of the Artificial Magnetic Conductor (AMC). A multilayer patch type of Frequency Selective Surface (FSS) is stacked on the AMC structure, to increase the thickness ... -
Temperature effects on the optical properties of bismuth nanoparticles prepared by PLAL for antibacterial activity
(Universiti Malaysia Perlis (UniMAP), 2023-01)Bismuth nanoparticles (Bi NPs) constitute a promising technology for combating infectious illnesses and bacterial resistance to antibacterial treatments. Bi NPs were synthesized by Pulsed Laser Ablation in Liquid (PLAL) ... -
Test load determination on composite Standard Malaysian Rubber constant viscosity 60 for earthquake isolator
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper describes the test load determination on composite Standard Malaysia Rubber constant viscosity 60 for earthquake isolators. The usage of natural rubber in the development of earthquake isolators for building ... -
Textural and Adsorption Analysis of Nanocarbon Particles
(Universiti Malaysia Perlis (UniMAP), 2018-07)In this present work, the characterization of the nanocarbon material which is multi-walled carbon nanotube (MWCNT) and carbon nanofiber (CNF) was investigated using nitrogen gas adsorption technique, Fourier transform ... -
Theoretical demonstration of elastic wave guiding in a Pillar-Based phononic crystal slab
(Universiti Malaysia Perlis (UniMAP), 2020-12)We demonstrated theoretically the wave guiding of elastics waves in a two-dimensional (2D) phononic crystal (PnC) slab. The simulation model based on the Finite Element Method (FEM) was used to calculate the dispersion ... -
Theoretical model for temperature distribution resulting from CW-Laser radiation heats up tumor tissues
(Universiti Malaysia Perlis (UniMAP), 2019-10)Continuous wave laser radiation is used to heat up tumor tissue where the cells in this tissue are more sensitive to heating. Temperature distribution is connected to hyper thermal therapy. First, the nonlinear bio-heat ... -
Theoretical prediction of equation of state for semiconductors
(Universiti Malaysia Perlis, 2016)The isothermal EOS provides a powerful tool for theoretical prediction of different thermo elastic properties at extreme compressions. In the present work an attempt has been made for theoretical computation of pressure ... -
Thermal and photoluminescence propersties of Nd ³⁺ doped tellurite nanoglass
(Universiti Malaysia Perlis, 2014)Series of glass based on (75-x)TeO₂-15MgO-10Na₂O-xNd₂O₃, where x=0, 1.0, 2.0, and 3.0 are synthesized by conventional melt-quenching technique. The nanoglass particles are derived from heat treatment of this glass near ... -
Thermal Effect on Mirror Reflectivity Based on DBR for Optoelectronics Devices
(Universiti Malaysia Perlis (UniMAP), 2019-01)In this work, the thermal effect on the mirror reflectivity based on distributed Bragg reflector (DBR) in terms of the center wavelength shifting and reflectivity ratio is theoretically investigated and experimentally ... -
The thermal, surface chemical, and electrical properties of BiFe1-xZnxO3 (x = 0, 0.06, 0.12) Nanocrystalline through Sol-gel Technique
(Universiti Malaysia Perlis (UniMAP), 2021-07)The synthesis of zinc doped bismuth ferrite has been successfully carried out using the sol- gel autocombustion method. The thermal properties through the TGA test showed that the mass began to stabilize in the range of ... -
Thermo-mechanical and adhesion performance of Silver-Filled Conductive Polymer Composite (SFCP) using Thermoplastic Polyurethane (TPU) Substrate
(Universiti Malaysia Perlis (UniMAP), 2020-05)Emerging of conductive metal filler in nanoscale like Silver-Filled Conductive Polymer Composite (SFCP) ink is one of the important technology for electronic interconnects future. Among the key challenges in the successful ... -
Third Order Nonlinear Properties of Rhodamine B Dye Doped PVA Polymer Determined by Eclipsing Scan Technique
(Universiti Malaysia Perlis (UniMAP), 2018-04)Nonlinear (NL) optical properties were observed in Rhodamine B (RB) dyes doped in poly (vinyl alcohol) (PVA) polymer films. Eclipsing Z‐scan (EZ‐scan) with a continuous wavelength of 532 nm was used to investigate the ... -
Three-dimensional uniaxially aligned nanofibre construct using secondary electrode assisted gap electrospinning
(Universiti Malaysia Perlis (UniMAP), 2020-05)Electrospinning is a simple, versatile, and scalable method of producing polymeric nanofibres from a solution or melt using electric charge. Due to their nanometre-scale diameters, electrospun fibres have been the subject ... -
Train noise level at residential area in Kuala Lumpur: preliminary study
(Universiti Malaysia Perlis (UniMAP), 2021-08)Nowadays, rail transport is one of the most important transport modes chosen by Malaysians. However, the noise pollution caused by the railway causes complaints from residents living near this track. Therefore, the ... -
Transient response monitoring of a loaded rubber using a circular- shaped optical fibre bend sensor
(Universiti Malaysia Perlis (UniMAP), 2020-12)When rubber is subjected to a load, deformation will occur in the form of transverse compression. At a microscopic level, the bond structure in the rubber is transformed from one equilibrium state, corresponding to the ... -
Transient thermal analysis on convection process of circular plate used in hot surface deposition test rig
(Universiti Malaysia Perlis (UniMAP), 2022-03)The purpose of this study is to investigate the transient thermal behavior of the convection process of a circular-shaped aluminum alloy plate used in the Hot Surface Deposition Test (HSDT) rig. The temperature distribution ... -
Transmission line method (TLM) measurement of (metal/ZnS) contact resistance
(Universiti Malaysia Perlis, 2015)In this paper, we have examined different metals (Au, Al, In) Ohmic contacts on spray deposited ZnS thin films. The thermal stability of the contact structures was also examined by annealing process. Specific contact ... -
Tunable carbon quantum dots from starch via microwave assisted carbonization
(Universiti Malaysia Perlis (UniMAP), 2017)Tunable luminescence carbon dots (C-dots) were prepared through microwaveassisted carbonization of aqueous starch suspension mediated by sulfuric and phosphoric acids respectively as surface passivating agents. The ... -
Two dimensional (2D) OCDMA encoder/decoder for various industrial application
(Universiti Malaysia Perlis (UniMAP), 2021-12)Future telecommunication systems and networks are expected to provide a variety of integrated broadband services to the customers. There has been a tremendous interest in applying Code Division Multiple Access (CDMA) ...