Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 273-292 of 383
-
Peristaltic micro-pump with normally deflecting membrane fabricated using glass based naster mold
(Universiti Malaysia Perlis (UniMAP), 2020-12)In this project, a Peristaltic fluid micro pump having normally deflecting membrane on a glass based master mold is developed. The developed peristaltic micro-pumps consists of three or more pump membranes connected ... -
Phosphate adsorption from synthetic aqueous solutions by waste mussel shell: kinetics and isotherms studies
(Universiti Malaysia Perlis (UniMAP), 2021-08)The amount of phosphorus released to the wastewater from industry is alarming. One of the phosphorus effects to the environment is eutrophication that will cause algal blooms. Algal blooms will cover the water surface and ... -
Prediction effects on internal resonance wave of metallic conductive ink in rotational motion behaviour
(Universiti Malaysia Perlis (UniMAP), 2020-05)This paper represents the effects on internal resonance wave of metallic conductive ink in rotational motion behaviour. The internal resonance metallic conductive ink model is developed using the wave propagation approach. ... -
Prediction model for spectroscopy using Python programming
(Universiti Malaysia Perlis (UniMAP), 2021-12)This paper is motivated by searching for the perfect pattern for the spectroscopy spectra using artificial neural networks (ANN) using python programming coding. The pattern from the spectroscopy is based on the absorption ... -
Prediction of basic and circular vibration isolator in high frequencies using Malaysian natural rubber for highway C2L machine
(Universiti Malaysia Perlis (UniMAP), 2021-08)This paper represents the basic and circular vibration isolator in High Frequencies using Malaysian natural rubber. Rubber material is chosen because it has very high damping to ensure the sufficient dissipation of vibration ... -
Prediction of coastal erosion/accretion and sediment properties at Batu Pahat coastal area
(Universiti Malaysia Perlis (UniMAP), 2022-03)Coastal erosion and accretion may be defined to be natural processes for which predicting the coastal magnitude is essential for a better coastal monitoring. The purpose of this study is to investigate the shoreline ... -
Prediction of material removal rate in wire electrical discharge turning using artificial neural networks and adaptive neuro-fuzzy models
(Universiti Malaysia Perlis (UniMAP), 2022-03)This work intended to assess the prediction and simulation effectiveness of the artificial neural network (ANN) with adaptive neuro-fuzzy inference system (ANFIS) approaches for modeling the material removal rate (MRR) ... -
A Preliminary study on feasibility radar cross-section of foreign object debris for size classification
(Universiti Malaysia Perlis (UniMAP), 2021-12)In this paper, a preliminary evaluation study is conducted, which aiming to investigate the radar cross-section (RCS) value that is capable to be used as an input parameter for Artificial Neural network (ANN) backpropagation ... -
A preliminary study on structural and optical properties of heat treated NB2O5 nanostructure
(Universiti Malaysia Perlis (UniMAP), 2023-01)Annealing is a heat treatment that alters the physical and sometimes chemical properties of a material to improve their crystalline structure and other important properties. This work presents the effect of post heat ... -
Preparation and characterization of electrical, morphological and topographic properties for advanced conductive PMMA/PVDF/PANI ternary blend for low percolation threshold devices
(Universiti Malaysia Perlis (UniMAP), 2019-10)The presented work targets on developing an advanced conductive polymer blend. This polymer has a low permeation threshold at low concentrations of conductive polymer. Two groups of polymer blend, consist of a mixture ... -
Preparation and Characterization of Magnetite (Fe3O4) nanoparticles By Sol-Gel Method
(Universiti Malaysia Perlis (UniMAP), 2019-01)The magnetite (Fe3O4) nanoparticles were successfully synthesized and annealed under vacuum at different temperature. The Fe3O4 nanoparticles prepared via sol-gel assisted method and annealed at 200-400ºC were characterized ... -
Preparation and characterization of nanostructured ITO Thin Films by Spray Pyrolysis Technique: Dependence on annealing temperature
(Universiti Malaysia Perlis (UniMAP), 2023-01)Transparent conducting oxides (TCOs) like Indium tin oxide (ITO) have wide attention from all scientists which have low resistance and high visible light transmittance, used as transparent electrodes in many optoelectronic ... -
Preparation and investigation of gold nanoparticles by the technique of laser ablation for biological application
(Universiti Malaysia Perlis (UniMAP), 2022-07)This paper utilises environmentally friendly and cost-effective methods for the synthesis of gold nanoparticles (AuNPs) using distilled water (DW) solution via liquid pulse laser ablation (PLAL) technique with wavelength ... -
Preparation of CdSe quantum dots using laser ablation technique for Dye-Sensitized Solar Cell
(Universiti Malaysia Perlis (UniMAP), 2021-01)Organic dyes are known to be widely used in the manufacture of dye-sensitized solar cells. However, theoretical screening does not play an essential role in dyes design. This work seeks to improve the conversion efficiency ... -
Preparation of GNPs thermally conductive adhesive at different epoxy resin/curing agent ratio and mixing method
(Universiti Malaysia Perlis (UniMAP), 2021-08)Reinforcement of GNPs fillers to polymer composite show remarkable improvement in thermal conductivity. However, high aspect ratio of GNPs attributes to agglomerate during the preparation process, which limits its ... -
Preparation, characterization, and electrical conductivity investigation of multi-walled carbon nanotube-filled composite nanofibres
(Universiti Malaysia Perlis (UniMAP), 2021-08)There is a growing interest in carbon nanofibre materials especially for applications that require high surface area, excellent chemical inertness, and good electrical conductivity. However, in certain applications a ... -
Pretreatment studies and characterization of bio-degradable and 3d-printable filaments from coconut waste
(Universiti Malaysia Perlis (UniMAP), 2020-05)Natural fiber based filaments are economically, and environmentally friendly and they are sustainable which enables them to be applied in the production of novel composite materials. This research aims to produce 3D printed ... -
Promoting the aggregation and disaggregation dynamic of superparamagnetic nano-particles
(Universiti Malaysia Perlis, 2019-07)In this study the behavior of nano magnetite colloid particles with polystyrene coated in the presence of an external magnetic field was investigated. It is observed that the average cluster size and the number of clusters ... -
Quality evaluation on rotary Ultrasonic Assisted Drilling for Chemically Strengthened glass
(Universiti Malaysia Perlis (UniMAP), 2021-08)Demand for Chemically Strengthened (CS) glass has steadily increased for the past decade predominantly by the electronic devices industry. One of the major reasons are due to its superior strength and crack resistance ... -
Quantum Dot Cellular Automata: A New Paradigm for Digital Design
(Universiti Malaysia Perlis (UniMAP), 2018-01)Quantum Dot Cellular Automata (QCA) is a newly developed paradigm for digital design, which holds the potential as possible alternative to the present Complementary Metal Oxide Semi‐Conductor (CMOS) technology. After ...