Now showing items 2069-2088 of 2600

    • Recycling potential of waste materials as fire resistance material 

      Ayu Wazira, Azhari; Abdul Haqi, Ibrahim; Mahyun, Ab Wahab; Salwa, Mohd Zaini Makhtar; Azmil, Mohd Aris (Universiti Teknologi Malaysia (UTM), 2009-06-02)
      In this paper, the possibility of using waste materials as a major component for the manufacturer of thermal insulating elements is was studied. It is believed that the use of fly ash combined together with red gypsum which ...
    • Recycling waste tire into concrete-rubber composite 

      Mokhzani Khair, Ishak; Khairul Nizar, Ismail; Kamarudin, Hussin; Wan Mohd Sabki, Wan Omar; Mohd Asri, Ab. Rahim; Umar, Kassim; Libren Francis, Doublin; Norfadhilah, Ibrahim (Universiti Kebangsaan Malaysia (UKM)Faculty of Engineering & Built Environment, 2009-10-20)
      This research is to recycle waste tire to a concrete-rubber. The objective of this research is to investigate the possibility of using rubber particles as a replacement for the natural aggregates in concrete. These ...
    • Red blood cell segmentation using masking and watershed algorithm: A preliminary study 

      Johan, Mohamad Sharif; M. F., Miswan; Md Asri, Ngadi; Md Sah, Hj Salam; Muhammad Mahadi, Abdul Jamil (Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)
      Image segmentation is the most important step and a key technology in image processing which directly affect the next processing. In human blood cell segmentation cases, many methods were applied for obtaining better ...
    • Red mud as sorbent for S02 gas cleaning 

      Nabilah Aminah, Lutpi; Leon, Munro; John, Zhu (Curtin University of Technology, Sarawak Campus, 2009-11-24)
      The main purpose of this study was to investigate S02 removal using red mud as sorbent in laboratory. The study was carried out by using a laboratory-scale reactor to examine the batch absorption of S02 gas with slurry and ...
    • Reduction of soot emission from diesel fuelled engine using a novel after treatment system 

      M. M., Taib; A. J., Alimin; S. H, Amirnordin; H., Abd. Rahman (Universiti Malaysia Pahang, 2009-06-20)
      Malaysia is a rapidly developing country that is working hard towards achieving its Vision 2020, of becoming a developed country. The increase in economic activities has also resulted to an increase in the country air ...
    • Reduction of soot emission from diesel fuelled engine using a novel diesel particulate filter 

      M.M., Taib; Ahmad Jais, Alimin; S.H., Amirnordin; Hamimah, Abd. Rahman; Mas Fawzi, Mohd Ali (Universiti Malaysia Perlis, 2009-10-11)
      Malaysia is a rapidly developing country that is working hard towards achieving its Vision 2020, of becoming a developed country. The increase in economic activities has also resulted to an increase in the country air ...
    • Redundancy allocation for a high security control system using estimation of distribution algorithm 

      Melo, Haydee; Watada, Junzo, Prof. (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      Designing more reliable systems that operate without failing or stopping its operation has recently captivated the attention of researchers. The reliability engineering has focused on develop new techniques to improve the ...
    • Redundancy optimization of k-out-of-n system with Common-Cause Failures (CCFs) using the inspection period 

      Indwiarti; Erni D. Sumaryatie (Universiti Malaysia Perlis (UniMAP)Institut Matematik Kejuruteraan, 2010-06-02)
      Redundancy optimization of k-out-of-n:G system with Common-Cause Failures (CCF) are often determined by two things, level of cost (mean cost rate) of the resulting system configuration and the failure rate of each unit in ...
    • Reference-pulse CNC parametric curve real-time interpolator parallel algorithm using parallel programming 

      A. F. A., Nasir; W. A. W., Yusoff (Universiti Malaysia Pahang, 2009-06-20)
      This paper proposes a referencepulse Computerized Numerical Control (CNC) parametric curve real-time interpolator parallel algorithm using parallel programming. The algorithm uses an Open Multi-Processing (OpenMP) ...
    • Refined cellular automata model for Tawaf simulation 

      Zarita, Zainuddin; Lim, Eng Aik (Institute of Electrical and Electronics Engineers (IEEE), 2012-03-18)
      In this paper, a cellular automata (CA) model is extended to simulate the circular movements of Muslim pilgrims performing the Tawaf ritual within the Masjid Al-Haram facility in Makkah. There is scant literature on the ...
    • Reflection loss performance of hexagonal base pyramid microwave absorber using different agricultural waste material 

      Nornikman, Hassan; Fareq, Malek, Dr.; Soh, Ping Jack; Azremi, Abdullah Al Hadi (Institute of Electrical and Electronics Engineers (IEEE), 2010-11-08)
      Hexagonal base pyramid microwave absorber is the new design of microwave absorber. In this work, two sub-shapes are considered to compare it reflection loss performance. The shapes are hexagonal and truncated hexagonal ...
    • Regeneration of potential and kinetic energy from wastewater in tall buildings 

      Mahdi, shaynmehr; Alireza, Tavakoli; Golbarg, Asady; Majid, Bazargan (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      An innovative scheme has been presented for the regeneration of the potential and kinetic energy from the wastewater installations of tall buildings. In high buildings, energy is used to pump water to the upper floors. ...
    • Relationship between consolidation pressure and shear strength of tropical peat 

      Y., Duraisamy; M. I., Kadir; M. A., Samsuddin (Universiti Malaysia Pahang (UMP), 2009-06-20)
      This paper discusses the relationship between shear strength and consolidation pressure of tropical peat. One major problem related to construction on peat deposit is the low shear strength of the soil. Understanding ...
    • Relationship between mixing time and concrete strength 

      M. N., Ikhsan; H. A. A., Sidek; I. M., Pauzi; Z. A., Wahab; A. A., Amry (Universiti Malaysia Perlis, 2009-12-01)
      The effect of mixing time of concrete and its workability and compressive strength have been studied. The concrete samples used in the study are normal concrete of grade 30. The proportion of mixtures used in this study ...
    • The relationship between teaching approach to lecturer program with student competency in UTHM 

      Noorazman, Abd Samad; Jamil, Basir; Azman, Hassan; Hairuddin, Harun; Izzatul Hidayah, Abdul Hamid (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      This study was conducted to determine the relationship and influence of lecturers teaching approach of acquired competencies of children in the Teachers Graduation Programme (TGP) in UTHM. Aspects investigated lecturers ...
    • The relationship between Time Based Management towards Manufacturing Capabilities: Investigating in Malaysian Manufacturing Industries 

      Mohammad Harith, Amlus; Amlus, Ibrahim; Ahmad Zaidi, Abdullah; Ummi Naeimah, Saraeh; Adi Anuar, Azmin; Wan Sallha, Yusuf; Nur Afifah, Shuib (EDP Sciences, 2018)
      Towards Industry 4.0, Malaysian Manufacturing Firms need to identify back their manufacturing capabilities especially to increase the performance and profit. This research is conducted to identify the role of manufacturing ...
    • Relationship between volatile fatty acids concentrations and methane gas production in two-phase reactor 

      Irnis Azura, Zakarya, Dr.; Zaity Syazwani, Mohd Odli; Tengku Nuraiti, Tengku Izhar, Dr. (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      Production of methane gas via anaerobic digestion process is the method that already commercialized in the sustainable of renewable energy. Food waste co-digestion with palm oil mill effluent (POME) in two phase reactors ...
    • The relationship of knowledge sharing behavior towards the organizational innovation capability (case study of ISP organization in Malaysia) 

      Hassad, Hassan; Nor Azizah, Hitam; Junainor, Hassan (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      Knowledge sharing is very important to organization. Employees share knowledge among them so that they can learn new skills and apply the skills to their work. In the workplace, knowledge sharing will help the employees ...
    • Relationship of ubiquitous technology usage and competency among engineering undergraduates 

      Muliati, Hj. Sedek; Habibah, Ab. Jalil; Rosnaini, Mahmud, Dr.; Shaffee, Mohd Daud, Dr. (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      The aim of this paper is to present part of a study done related to the use of Ubiquitous Technology (UTech) among undergraduates in technical university. In specific, the objectives of the study were to (i) identify the ...
    • Relationships validation between KPOV and KPIV using hypothesis tests 

      Nooraizedfiza, Zainon; Mohd Zamzuri, Mohammad Zain (Universiti Malaysia Perlis (UniMAP)Institut Matematik Kejuruteraan, 2010-06-02)
      Hypothesis tests are procedures for making rational decisions about the reality of effects. The objective of this paper was to determine the relationships between Key Process Output Variables (KPOV) and Key Process Input ...