Browsing Conference Papers by Title

Now showing items 1252-1271 of 2600

    • An inductive approach in studying green innovation in Government-linked Companies 

      Noormaizatul Akmar, Ishak; Hartini, Ahmad (Universiti Malaysia Perlis (UniMAP)Centre for Communication Skills and Entrepreneurship, 2010-11-12)
      This paper is focusing on the research method to study of top management leadership attributes in implementing green innovation in Government-linked Companies (GLCs) in Malaysia. This paper will discuss on the paradigm ...

    • Industrial design innovation of Sarawak contemporary furniture design 

      Muhammad Firdaus, Abong Abdullah; Sharifah Emme Suzaimi, Syed Mohd Zahari; Mastika, Lamatah (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      This paper is part of a fundamental research on indigenous Dayak's motif of Sarawak as part of innovative design element for a contemporary chair design. Reviews of existing study on relation between novel, augmented, and ...

    • Inequalities of Nordhausgaddum type for doubly connected domination 

      Roslan, Hasni@Abdullah; S.M., Sheikholeslami; M. Hadi, Akhbari (Universiti Malaysia Perlis (UniMAP)Institut Matematik Kejuruteraan, 2010-06-02)
      Many problems in extremal graph theory seek the extreme values of graph parameters on families of graphs. Results of Nordhaus-Gaddum type study the extreme values of the sum (or product) of a parameter on a graph and its ...

    • Infant hungry recognition based on neural network and AR model 

      Muhammad Naufal, Mansor; Syahryull Hi-Fi Syam, Ahmad Jamil; Muhammad Nazri, Rejab; Addzrull Hi-Fi Syam, Ahmad Jamil (Institute of Electrical and Electronics Engineers (IEEE), 2012-08-25)
      To deal with nonverbal life was a difficult task. To study their behaviour without knowing what their needs is another crucial issue. A lot of researches have been rapidly investigated. Thus, in this paper we proudly ...

    • Inflation and unemployment in Malaysia 

      Mohd Shahidan, Shaari; Mohd Juraij, Abd. Rani; Mohammad Shariff, Ismail; Nor Ermawati, Hussain (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      The objective of this paper is to examine the relationship between inflation and unemployment in Malaysia using annually data from 1982 until 2010 and also to see whether the Phillips curve is applicable in Malaysia. ...

    • The influence of 71Ag-28Cu-1Mg filler alloy on microstructure and properties of spot brazed Titanium/Nickel joint 

      Hussain, Zuhailawati; Alaa Muhsin, Saeed; Ahmad Badri, Ismail; Tadashi, Ariga (Universiti Malaysia Perlis, 2009-12-01)
      The shear strength and microstructural characteristics of titanium-nickel joints joined by spot brazing technique was investigated in this work. The spot brazing process was performed with and without addition of 71Ag-28Cu-1Mg ...

    • Influence of activator composition on the properties of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Cheng Yong, Heah (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      This paper studied the influence of activator composition on the properties of calcined kaolin geopolymeric powder. The alkaline activation of calcined kaolin was performed in mixture of waterglass liquid and NaOH solution ...

    • Influence of additional acetone on feedstock and density of Green Compact for micro metal injection moulding 

      Siti Rosilah; Muhammad Ilman, Hakimi; Abu Bakar, Sulong; Norhamidi, Mohammad (Universiti Malaysia Perlis, 2009-12-01)
      Micro Metal Injection molding (µMIM) is new manufacturing technologies that have great potential to produce products in micro size at mass production scale as well as having good persistence surface, complex shape and ...

    • Influence of anodizing voltage on formation of Porous Anodic Aluminium Oxide thin films in mixed solution of H3PO4 and CH3COOH 

      Juyana, A. Wahab; Mohd. Nazree, Derman; A.H, Iqwan (Universiti Malaysia Perlis, 2009-12-01)
      A porous anodic aluminium oxide (AAO) thin film on aluminium was prepared in a mixed electrolyte of phosphoric acid and acetic acid solution. The growth and morphology of the film were investigated. During the anodizing ...

    • Influence of binder in iron matrix composites 

      S., Shamsuddin; Shamsul Baharin, Jamal, Prof. Dr.; Z., Hussain; Z. A., Ahmad (American Institute of Physics, 2010-03-11)
      The ability to use iron and its alloys as the matrix material in composite systems is of great importance because it is the most widely used metallic material with a variety of commercially available steel grades [1]. The ...

    • Influence of chromium and powdered activated carbon (PAC) on activated sludge microorganisms and sequencing batch reactor treatment process 

      Ong, Soon-An; Toorisaka, Eiichi; Hirata, Makoto; Hano, Tadashi (Universiti Teknologi Mara (UiTM), 2006-12-08)
      One of the possibilities of using activated carbon in wastewater treatment is the direct addition of powdered activated carbon (PAC) to an activated sludge system, thus combining adsorption and biodegradation. The aim of ...

    • Influence of difference deposition technique of Nickel on the FeCrAl Metallic Monolith 

      Darwin, Sebayang; P., Untoro; Y., Putrasari; Y.H., Soon; M., Hashim; M., Ghooma (Universiti Malaysia Perlis, 2009-12-01)
      To utilize a low cost nickel element as catalyst material for monolith support of catalytic converter is a challenge to the engineer who works on the field of material science. The dual ability of nickel as catalyst and ...

    • The influence of employees’ competency on safety behavior 

      Rosli, Mahmood; Fadzli Shah, Abd Aziz; M., Mustafa; A., Salleh (Universiti Malaysia Perlis (UniMAP), 2009-12-01)
      Objective: The aim of this paper is to investigate the influence of competency among the employees working in the petrochemical industry on their safety behavior while performing the jobs at the workplace. Problem: Safety ...

    • The influence of filler metal on porosity formation of AA6061 aluminium alloy joints 

      M.F.A, Ibrahim; A.A.A., Aziz; Azman, Jalar; J., Syariff; M.N., Rashdi (Universiti Malaysia Perlis, 2009-12-01)
      Porosity is very important parameter to evaluate the quality of butt-joint since it is recognized to be one of the major concerns during welding of aluminium alloys. The filler metal used during welding process is believed ...

    • Influence of four wave mixing on modulation format performance under 100 Gb/s data rate 

      Haider Jabber, Abed; Norashidah, Md. Din, Assoc. Prof. Ir. Dr.; Mohammed Hayder, Al-Mansoori, Dr.; Fairuz, Abdullah, Dr.; Hilal Adnan, Fadhil, Dr.; Noora, Salim; Adnan, Saher (Institute of Electrical and Electronics Engineers (IEEE), 2012-12-05)
      Four-wave mixing (FWM) is undesirable nonlinear effects that can degrade the optical transmission system. Under high data rate, i.e. 100 Gbps, and ultra-long haul distance, the effects of FWM can limit the system performance ...

    • Influence of polluted seawater on oxidation behaviour of Aluminum Alloy 

      Mohammed Misbahul, Amin; Ting, Tai Poh Yee; Ku Halim, Ku Bulat (Research Journal of Chemistry and Environment, 2005-12-24)
      Tropical harbors of Malaysia, the south china seawater characteristics have adequate corrosive environments due to chemical ingredients, biofouling nature as well as velocity. The influence of polluted seawater on oxidation ...

    • Influence of pretreatment for deashing of empty fruit bunches on pyrolysis products 

      Nur Sheli Akma, Ramli; Khairuddin, Md. Isa (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      This paper reports the studies made on the fixed-bed pyrolysis of empty fruit bunches (EFB), on the pyrolysis products. EFB is one of the solid wastes that are rapidly increasing in the palm oil industry. EFB samples ...

    • Influence of sample preparation and extraction time on chemical composition of steam distillation derived patchouli oil 

      Asdarina, Yahya; Rosli, Mohd Yunus (Malaysian Technical Universities Network (MTUN), 2012-11-20)
      Patchouli or Pogostemon Cablin (Blanco) Benth is one of the species of essential oil plant. In Malaysia, patchouli is commonly known as’nilam’. It is widely appreciated because of its value in medicine, toiletries, perfumery ...

    • Influence of seawater pollution on corrosion of Iron-Carbon alloy 

      Mohammed Misbahul, Amin; Kamaruzzaman, Yunus; Ku Halim, Ku Bulat (Malaysian Society of Marines SciencesUniversity College of Science and Technology Malaysia, 2002-05-12)
      Seawater pollution has been identified as a potential danger to metallic materials used under service conditions. Seawater foulants have adequate corrosive environment due to chemical ingredients especially halides compounds. ...

    • The influence of sintering temperature to the physical properties of P/M Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin; Md. Fazlul, Bari (Universiti Malaysia Perlis, 2009-12-01)
      Co-Cr-Mo (F-75) alloys are commonly used for surgical implants because of their strength, corrosion resistance and biocompatibility. Conventionally, fabrication of the alloys has been established using casting technique. ...