Browsing School of Environmental Engineering (FYP) by Subject "Palm oil clinker (POC)"

Now showing items 1-6 of 6

    • Characteristic of light weight aggregate (Palm oil clinker) 

      Norazrin, Ramli (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2010-04)
      Lightweight aggregate (LWA) is a lightweight inert material, such as foamed slag, vermiculite, clinker, and perlite. The palm oil clinker (POC) is one of the agricultural waste, produced in abundance has the potential to ...

    • The effect of shear connection on half precast concrete slabs 

      Nur Idanie, Rapian (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This study introduces a semi- fabricated system for the construction of floor slabs. A prefabricated half precast slab is a manufacturing process, where consist two layer of concrete. Bottom layer fabricate in the factory ...

    • Masonry bond by using different percentage of palm oil clinker substitution with water-cement ratio variation 

      Walvirus, Joseph (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Palm oil clinker (POC) which is relatively low cost and abundantly available had the potential as a replacement for aggregates in the production of mortar. This study investigated the effects of substitution of palm oil ...

    • Properties of mortar strength by using fine aggregate palm oil clinker with variation of water cement ratio 

      Jackline Medan, Ikom (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Palm oil clinker (POC) is one of the waste material with a low cost that can found in the palm oil industry. POC has potential as a fine aggregate to replace the sand to produce mortar. This thesis was discusses about ...

    • The properties of mortar strength containing palm oil clinker with difference mixing procedure 

      Khairul Zaaba, Zainal (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      As a major manufacturer of palm oil in the world, one of the great challenges facing is the disposal of the waste product from the palm oil mill. These waste products will lead to environmental hazards that contribute to ...

    • The properties of soil stabilize with palm oil clinker (POC) 

      Wan Muhammad Azfar, Wan Azmi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      This project was conducted to study the behaviour of soil stabilization using palm oil clinker with the POC-to-soil ratio; 5%, 10%, 15%, and 20%. Soil stabilization is the process of mixing and blending materials into ...