Search
Now showing items 51-60 of 350
WSS investigation in microfluidic FFS channel at Re 500
(Trans Tech Publications, 2014-01)
Wall shear stress (WSS) is one of the important variables in microfluidic devices. In this paper WSS distribution for a microfluidic device in Forward Facing Step (FFS) configuration has been investigated using Reynolds ...
Heat sink fin number variation analysis on single chip high power LED
(Trans Tech Publications, 2014-01)
Thermal management of high power LED is crucial the reliability and performance of the LED affected by the heat produced during photon emission. Heat sinks are utilized to dissipate the heat and to lower the operating ...
P-recovery as calcium phosphate from wastewater using an integrated selectrodialysis/crystallization process
(Elsevier, 2014)
A promising and sustainable renewable source of phosphate was obtained through crystallization of calcium phosphate from wastewater. The aim of the present study was to evaluate the feasibility of an integrated ...
The behaviours of steel fiber as main reinfocement in high performance slurry infiltrated fiber reinforced concrete
(Trans Tech Publications, 2014)
Normally, the concrete structure fabricated by combining steel bars as main reinforcement to the concrete mix. In this methid, the steel fiber is randomly distributed in the mould before the concrete slurry takes place. ...
Design and development of sensing system for mines detector robot
(Trans Tech Publications, 2014)
This paper presents the design and development of sensing system for mines detector robot. The objective of this project is to identify the optimum metal detection system and design and develop the sensing system of mines ...
BaₓSr₁-ₓ TiO₃ different thickness analysis using sol gel approach
(Trans Tech Publications, 2014-01)
Barium Strontium Titanate (BST) a common topic in the microelectronic field for many devices which is mainly on dynamic random access memories (DRAM). There are many methods of preparing BaₓSr₁-ₓTiO3; barium strontium ...
Thin film thickness and uniformity measurement for lab-on-chip based nanoelectrode biosensor development
(Trans Tech Publications, 2014)
One of the advantages of silicon substrate over other semiconductor substrate is the high temperature process capability of the silicon. In this work, silicon wafer is used for thermal processing which involves many high ...
Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method
(Trans Tech Publications, 2014)
A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ...
Mixing optimization of Sn-Cu-Si₃N₄ via powder metallurgy route for composite solder fabrication
(Trans Tech Publications, 2014)
The aim of this study was to optimize the mixing process of a composite solder fabricated via powder metallurgy route, before details study were conducted in the next stage. Powder of Sn, Cu and Si₃N₄ were carefully weighted, ...
Effect of processing route on the morphology of thermoplastic polyurethane (TPU) nanocomposites incorporating organofluoromica
(Trans Tech Publications, 2014)
In the production of polymer nanocomposites, the processing method determines the dispersion of the nanofiller and hence, the final nanocomposite properties. In this work, the potential of high energy milling of the ...