Search
Now showing items 61-70 of 350
Fibrous material density difference analysis using light reflectance
(Trans Tech Publications, 2014)
The objective of this work is designed and fabricated a lab module tester to differentiate the different type of printing paper quality which available commercially was done. Laser light source was used to differentiate ...
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Curing characteristics and swelling test
(Trans Tech Publications, 2014)
Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ...
LED heat dissipation analysis using composite based cylindrical slug
(Trans Tech Publications Inc., 2014-02)
The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports ...
Surface morphology and corrosion behavior of electrolytic coatings in different aqueous solutions
(Trans Tech Publications, 2014)
ZrO₃/AI₂O₃, AI₂O₃/Y₂O₃, ZrO₂/Y₂O₃ coatings were applied on SS440C steel substrates via an electrolytic double layer coating process. The effect of these different ceramic aquecous solutions on the surface morphology and ...
Growth kinetic of fresh and frezee-dried pleurotus sajor-caju (oyster mushroom) mycelium for preservation study
(Trans Tech Publications, 2014)
An investigation was conducted to determine an effective media condition for the growth of fresh and freeze-dried oyster mushroom mycelium. Fresh and freeze-dried mycelium sub-culture on liquid media obtained 0.3022 and ...
Extraction of silica from palm ash using organic acid leaching treatment
(Trans Tech Publications, 2014)
Agricultural wastes such as palm ash and rice husk have a possibility to be used as a usefully renewable source for production of energy and silica (SiO2). Extensive researches have been carried out to extract silica from ...
Root causes analysis of disbonds and unidentifiable ultrasonic indications on composite materials
(Trans Tech Publications, 2014)
To ensure the structural integrity of composite materials, honeycomb sandwich panels must be inspected for defects with through-transmission ultrasonic testing. This study focused on the root causes analysis of disbonds ...
Natural heat convection analysis on cylindrical Al slug of LED
(Trans Tech Publications, 2014-01)
This paper presents the characterization of a single chip high power LED package through simulation. Ansys version 11 was used for the simulation. The characterization of the LED package with aluminum cylindrical heat slug ...
Design and development of sensing system for mines detector robot
(Trans Tech Publications, 2014)
This paper presents the design and development of sensing system for mines detector
robot. The objective of this project is to identify the optimum metal detection system and design and develop the sensing system of mines ...
Reviewed immunosensor format using nanomaterial for tungro virus detection
(Trans Tech Publications, 2014)
Recently, nanomaterial based biosensor application has drawn a lot attention among researchers because of specialty to enhance the sensor signal for increasing the sensitivity for detecting and identification of pathogen, ...