Search
Now showing items 31-40 of 59
Fabrication Of 50 µm transistor and AlNiAu interconnection process
(Universiti Malaysia Perlis, 2007-03)
Generally process fabrication transistor will starts by cleaning the wafer, formation region drain, D and source, S, get oxide and deposited aluminum as contact with the source, drain and gate. Mask is very important thing ...
16-Bits High Speed Carry Select Adder
(Universiti Malaysia Perlis, 2007-03)
This report presents the design, performance evaluation of two design of 16-bit carry select adder. The layout for the high speed 16-bits carry-select adder was present in this report. The comparison of both designs is to ...
Characterization of Intermetallic Growth in Gold Ballbonds on Aluminum Metallization
(Universiti Malaysia Perlis, 2007-03)
The objective of this project is to study the capability of gold wire bonding process by investigating the intermetallic growth between gold ball bonds and aluminum bond pad. The study includes applying thermal storage ...
Design and implementation of a Music Box using FPGA
(Universiti Malaysia Perlis, 2007-03)
A design and implementation of music box using FPGA is presented in this report. FPGA is a digital logic chip that can be programmed to do almost any digital function. An effort has been carried out to make the FPGA to ...
The Effect of Power Density on the Surface Layer of Amorphous Thin Film
(Universiti Malaysia Perlis, 2007-03)
The development of amorphous silicon (a-Si) device technology since the advent of the first solar cell in 1974 has been truly spectacular with commercial products such as photocopiers, laser printers, facsimile machines, ...
Study and Design the Current Mirror using Bulk-Driven Technique for Low Voltage Analog
(Universiti Malaysia Perlis, 2007-04)
Current Mirrors are core structure for almost all analog and mixed mode circuits
and the performance of analog structures largely depends on the characteristic. In this design, the design presents some of the low voltage ...
Simulation Of 0.35 Um NMOS Process Based on UniMAP Cleanroom Facilities
(Universiti Malaysia Perlis, 2007-05)
The Micro Fabrication Cleanroom in University Malaysia Perlis (UniMAp) was completed in December 2003 and was built as a teaching laboratory. The goal of this project is to simulate a 0.35um negative-metal-oxide-semiconductor ...
Improvement of SiGe HBT Design and Technology Performance using Device Simulation
(Universiti Malaysia Perlis, 2007-04)
Simulation of the effect of various design parameters on the performance of the HBT is
essential for obtaining the optimized design. This is based on the requirement for a reliable computation of the HBT performance. ...
BST Sensor Application: Digital Thermometer
(Universiti Malaysia Perlis, 2007-03)
This thesis deals with the research of Barium Strontium Titanate (BST) sensor and its application as digital thermometer. In general BST sensor was still in research stage, because this sensor is the first BST sensors that ...
BTST Thin Film Sensor Application: Heat Indicator
(Universiti Malaysia Perlis, 2007-03)
This report contains an account of my final year project, which was carried out in the forth year of the Electronic Engineering (B.Eng) degree at Universiti Malaysia Perlis.
This paper is based on the design and analysis ...