Search
Now showing items 31-40 of 41
Design and analysis of Three-Axis Piezoresistive accelerometer
(Universiti Malaysia Perlis, 2008-04)
Recently, micro-electromechanical system (MEMS) technologies have been used to
manufacturer accelerometers. MEMS sensors include tranducers elements and the necessary signal conditioning electronics integrated together ...
Smart Arm Robot using Visual Basic program
(Universiti Malaysia Perlis, 2008-04)
The aim of the project was to design the software using Visual Basic program to control the robot arm, design the electronic circuit and build the Robot Arm. The
controlling of the robot arm using wireless radio frequency ...
Analysis of the deposited carbon during Electron Beam Induced Deposition (EBID) in Scanning Electron Microscope using Secondary Ion Mass Spectrometry (SIMS)
(Universiti Malaysia Perlis, 2008-03)
Many experiments on the mechanics of nanostructures require the creation of rigid
clamps at specific locations. In this work, electron beam induced deposition (EBID) has been used to deposit carbon films that are similar ...
Car Reverse Sensor with distance display
(Universiti Malaysia Perlis, 2008-03)
Car reverse sensor with distance display is a design to improve driver awareness in maneuvering reversed gear. The design also helps deaf person to benefit from today
technology. The distance displays fast enough to give ...
Fan control and monitoring system using Visual Basic program
(Universiti Malaysia Perlis, 2008-04)
This thesis is about the usage of a system to control and monitor a fan or more for
certain kinds of operation and application in real life. This is including on how to control the fan speed manually or by using temperature ...
MEMS Cantilever beam monitor
(Universiti Malaysia Perlis, 2008-04)
Three cantilever beam monitor has been designed using the same material and dimension. They are the center, left and right cantilever beam with their own contact pad. The center beam can be displaced to the right or left ...
Analysis of Switched Mode Power Supply (SMPS) with Energy Saving Requirement
(Universiti Malaysia Perlis, 2007-04)
Nowadays, the Switched-Mode Power Supply (SMPS) plays an important role in the consumer power market. With its small size, it can be found everywhere from mobile phone chargers to Plasma TVs or even in compact dics players ...
High speed six operands 16-bits carry save adder
(School of Microelectronic Engineering, 2007-03)
Adders are commonly found in the critical path of many building blocks of microprocessors and digital signal processing chips. The most important for measuring the quality of adder designs in the past were propagation ...
Synthesis, layout design and simulation of 8-bit Serial Peripheral Interface (SPI) using Leonardo Spectrum and Mentor Graphics tools
(Universiti Malaysia Perlis, 2007)
In this project, Serial Peripheral Interface (SPI), was designed. This project will
include design, synthesis and simulation of SPI. SPI is a synchronous serial data link that operates in full duplex mode and it will ...
Simulation for forming Shallow Trench Isolation in the IC using TCAD tools
(Universiti Malaysia Perlis, 2008-04)
A simulation for forming shallow trench isolation (STI) in the integrated circuit
(IC) is introduced. Firstly, using the Taurus Workbench-tools, the first silicon oxide layer and a silicon nitride layer are formed ...