Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/32463
Title: Intermetallic compound formation on solder alloy/cu-substrate interface using lead-free sn-0.7cu/recycled-aluminum composite solder
Authors: Flora Somidin
Mohd Arif Anuar, Mohd Salleh
Khairel Rafezi, Ahmad, Dr.
florasom@gmail.com
arifanuar@unimap.edu.my
rafezi@unimap.edu.my
Keywords: Composite solder
Intermetallic compound
Powder metallurgy
Recycle-aluminum
Sn-0.7Cu
Issue Date: Dec-2012
Publisher: Scientific.Net
Citation: Advanced Materials Research, vol.620, 2012, pages 105-111
Abstract: Feasibility of using recycled-Aluminum (re-Al) as reinforcement particulates in Sn-0.7Cu is assessed by powder technology method, whereby re-Al particulates are produced from discarded aluminum beverage cans. This paper focuses on the intermetallic compound (IMC) formation study between the fabricated solder composite on Cu-substrate. Throughout this study, four different composition of Sn-0.7Cu/re-Al (0.0, 3.0, 3.5, 4.0 wt.%) were studied. X-ray diffraction (XRD) was used to analyze the IMCs phase formation between the interfaces. New IMC phase of Cu9Al4 was detected beside Cu6Sn5 and Cu3Sn in the composite solder samples. However, Sn-0.7Cu/3.0re-Al showed least formation of brittle IMCs compared to the monolithic solder.
Description: Link to publisher's homepage at http://www.scientific.net/
URI: http://dspace.unimap.edu.my:80/dspace/handle/123456789/32463
ISSN: 1662-8985
Appears in Collections:Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir.
Khairel Rafezi Ahmad, Associate Prof Dr.
School of Materials Engineering (Articles)

Files in This Item:
File Description SizeFormat 
Intermetallic Compound Formation on Solder Alloy.pdf135.01 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.