Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/1993
Title: | Study of the effect of different Gases parameter in Dry Etching process on Etch Rate profile |
Authors: | Zaharah Mohamed Nur Juliana Juhari (Advisor) |
Keywords: | Semiconductors -- Etching Plasma etching Silicon oxide Semiconductors -- Design and construction Integrated circuits |
Issue Date: | Apr-2008 |
Publisher: | Universiti Malaysia Perlis |
Abstract: | The principal focus of this project is dry etching technique by using the Inductively Couple Plasma-Reactive Ion Etching (ICP-RIE). An (ICP) system was chosen because of its high plasma density and low cost relative to other high density plasma etching systems. The etch rates and picture size were studied as a function of ICP power, pressure, RF power bias, process time and gas composition. Dry etching technique is favoured in most etching work due to it’s etch rate properties. This project to provide a recipe for get the effect of different gases parameter in dry etching process on etch rate profile. For obtain the profile etch rate and picture size by using a profilometer and Scanning Electron Microscope (SEM) imaging. |
Description: | Access is limited to UniMAP community. |
URI: | http://dspace.unimap.edu.my/123456789/1993 |
Appears in Collections: | School of Microelectronic Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgment.pdf | 93.91 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 100.16 kB | Adobe PDF | View/Open | |
Introduction.pdf | 106.94 kB | Adobe PDF | View/Open | |
Literature review.pdf | 477.26 kB | Adobe PDF | View/Open | |
Methodology.pdf | 434.81 kB | Adobe PDF | View/Open | |
References and appendix.pdf | 161.28 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 5.9 MB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.