Search
Now showing items 1-10 of 18
Sol-gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications
(Elsevier GmbH, 2013-11)
Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol-gel route. The seed solution was prepared using two different solvents ...
Fabrication and characterization of ZnO thin films by sol-gel spin coating method for the determination of phosphate buffer saline concentration
(Bentham Science Publishers., 2013)
The fabrication, characterization and application of nanostructured zinc oxide (ZnO) thin films on interdigitated silver electrodes were described for the determination of phosphate buffer saline (PBS) concentration. The ...
Study of zinc oxide films on SiO2/Si substrate by sol-gel spin coating method for pH measurement
(Trans Tech Publications, 2013)
This In this work, zinc oxide film was deposited onto the SiO2/Si substrate with low-cost sol-gel spin coating method. Zinc oxide thin film was deposited on the silver interdigit elctrodes for the pH measurement. The surface ...
Study the optical characteristic of ZnO nanostructure through annealing at various time period
(Trans Tech Publications, 2014)
Main purpose of this research is to study the optical and electrical characteristic of zinc oxide material after undergoing annealing process at various time period. Hypothesis of this research have proved that the physical ...
Effect of anodizing voltage on the morphology and growth kinetics of porous anodic alumina on Al-0.5 wt% Mn alloys
(Trans Tech Publications, 2014)
In this study, the effect of anodizing voltage on the morphology of porous anodic alumina and growth kinetics of anodizing of aluminium manganese alloy was reported. It was found that the increasing anodizing voltage affect ...
Design of 3D micromixer for bio-synthesis using COMSOL multiphysics software package
(American Scientific Publishers, 2013-12)
Moving parts of micrometer scale make the chips very expensive and fragile and are therefore to be avoided if at all possible. An alternative method for transporting fluid in the samples is through capillary effect, the ...
Fabrication and characterization of IDE based sensor through conventional lithography method
(Trans Tech Publications, 2014)
This paper mainly illustrate regarding the fabrication process of IDE based sensor for bio-molecular detection process. Material that is utilized in this process is zinc oxide due to bio-compability and elevated electrical ...
Design and fabrication of nano biologically sensitive field-effect transistor (nano bio-FET) for bio-molecule detection
(American Institute of Physics, 2011)
Biologically Sensitive Field-Effect Transistor (Bio-FET) based on silicon nanowires (SiNWs), so called Nano Bio-FET, promise ultrasensitive dynamic label-free electrical detection of bio-molecule. Therefore, Nano Bio-FET ...
Sol-gel synthesis of ZnO nanorods for ultrasensitive detection of acetone
(American Scientific Publishers, 2013-12)
ZnO nanorods were synthesized on low cost thermally oxidized silicon substrate using a simple and easily performable sol-gel spin coating technique followed by hydrothermal growth. C-axis orientation, good crystalline ...
Technology development for nano structure formation: Fabrication and characterization
(American Scientific Publishers, 2013)
The paper contain a report on a technology development for nano structure formation using standard CMOS process-based method capable of fabricating precisely control nano wire and nanogap. The fabrication of nanoscale ...