Show simple item record

dc.contributor.authorMazlee, Mohd Noor
dc.contributor.authorShamsul Baharin, Jamaludin
dc.contributor.authorKamarudin, Hussin
dc.date.accessioned2009-07-29T07:48:31Z
dc.date.available2009-07-29T07:48:31Z
dc.date.issued2008
dc.identifier.citationAmerican Journal of Applied Sciences, vol.5 (6), 2008 pages 721-725en_US
dc.identifier.issn1546-9239 (printed)
dc.identifier.issn1554-3641 (online)
dc.identifier.urihttp://www.scipub.org/scipub/detail_issue.php?V_No=200&j_id=ajas
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/6610
dc.descriptionLink to publisher's homepage at http://scipub.org/scipub/index.phpen_US
dc.description.abstractThe microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting condition at the interface. The wettability of solid metals by liquid metals is very important in determining the needed properties of the composite systems. In this study, the wetting conditions have been characterized using optical microscopy and scanning electron microscopy. Good wetting, incomplete wetting and very poor wetting associated with large voids are seen at the Al-Si-Mg/SSw interfaces. Heavily concentrated of needle shaped eutectic Si particles are found near to the single stainless steel wire as compared to double stainless steel wires.en_US
dc.language.isoenen_US
dc.publisherScience Publicationsen_US
dc.subjectInterfaceen_US
dc.subjectNeedle shaped eutectic Si particlesen_US
dc.subjectWetting conditionsen_US
dc.subjectCastingen_US
dc.subjectSteel, Stainlessen_US
dc.subjectAlloysen_US
dc.subjectSteel wireen_US
dc.titleMicrostructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting techniqueen_US
dc.typeArticleen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record