| dc.contributor.author | Wan Mohd Norhasmi, Wan Hashim | |
| dc.date.accessioned | 2015-07-14T08:07:41Z | |
| dc.date.available | 2015-07-14T08:07:41Z | |
| dc.date.issued | 2011-04 | |
| dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/40329 | |
| dc.description | Access is limited to UniMAP community. | en_US |
| dc.description.abstract | This project is mainly about constructing a DC motor speed controller using
microcontroller PIC 16F877A. It is an open loop control system where the output motor
speed signal is feedback to the controller by using an encoder sensor. The PIC 16F877A is programmed by using MPLAB software via C language. The program consists of the PWM signal, rotary encoder speed readings, and the LCD display. Pulse Width Modulation (PWM) technique is used where its signal is generated within the microcontroller. The
microcontroller then acts as the controller in this project. The generated PWM signal was
sent to motor driver to generate new input voltage for the DC motor. Then, the new desired
speed is achieved. With the project data and observation, it can be conclude that the speed
control project objective was achieved where, the DC motor speed can be control by using
the PWM duty cycle control method. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
| dc.subject | Motor speed control | en_US |
| dc.subject | Servo motor | en_US |
| dc.subject | Electric motors | en_US |
| dc.subject | Direct current motor | en_US |
| dc.subject | Speed controller -- Design and construction | en_US |
| dc.title | Speed controller for servo motor for industrial purpose | en_US |
| dc.type | Learning Object | en_US |
| dc.contributor.advisor | Prof. Madya Dr. Siti Fatimah Siraj | en_US |
| dc.publisher.department | School of Electrical Systems Engineering | en_US |
