Now showing items 1-20 of 218

    • Analysis of unsymmetrical fault 

      Firdaus Johan (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007)
      This project is to analyzed of unsymmetrical fault with using the software named Mi Power. In this case of the project we should identify types of fault when fault occurred whether they are Single Line To Ground, Line To ...
    • The effect of field resistance on speed of DC shunt motor 

      Mubarak Zulkafli (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007)
      The objective of the experiment in this project is to study the speed of DC shunt motor when it is supplied by voltage. The speed of the DC shunt motor is controlled by variable-field resistance. The speed of the DC motor ...
    • Over current protection simulation for voltage sag in power system 

      Hafizan, Jaladudin (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      Voltage sags have become one of the major power quality concerns in recent years facing customer. Characteristics of voltage sags caused by faults in transmission and distribution networks depend on the over current ...
    • A study of neutral currents in three-phase distribution network with non-linear loads 

      Diana Geruka (School of Electrical Systems Engineering, 2007-03)
      Neutral currents are produce by non-linear load. Excessive neutral current can caused a lot of problem to the system. Beside, the third harmonic is the predominant component on the neutral. The total harmonic distortion ...
    • Energy saving proposal for UniMAP air-conditioning system 

      Siti Norhasliza Jamaluddin (School of Electrical Systems Engineering, 2007-03)
      University Malaysia Perlis (UniMAP) is one of the higher learning institutions in Malaysia, located at northern part of Malaysia. This report presented ideas how to reduce amount of energy usage per month and at the same ...
    • An artificial immune system (AIS) application to reactive power dispatch for loss minimization in distribution system 

      Ahmad Faiz, Noor Azam (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2007-03)
      This project presents voltage control methods to improve the voltage level of a power system whilst minimizing losses. Newton Raphson method is used to calculate losses to control the operation of reactive power dispatch ...
    • Performing of a single phase semiconverter with one thyristor 

      Loke Kar Keat (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      Today, being the dawn of a new technology wave, analyze and evaluate the performance of a single phase semiconverter with one thyristor have promised a new beginning to a wide spectrum of fields where a bridge rectifier ...
    • Design, develop and analysis a peak current control boost AC-DC converter 

      Abdul Hasli, Abdullah (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      This final year project is about design, develop and analysis a peak current control boost AC-DC converter. This project is covered from simulation and prototype implementation. Theoretically, it is base on boost converter ...
    • Performing of a single phase full-wave with one thyristor 

      Nor Asmawati, Kassim (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      This final year project is about “Performing a Single Phase Full-Wave with one Thyristor”. To complete this thesis full understanding and knowledge about the principal operation is important, start with the analysis circuit ...
    • Application of embedded generation in distrubution system using Artificial Immune System (AIS) 

      Muhamad Tarmimi, Abu Bakar (Universiti Malaysia PerlisSchool of Electrical System Engineering, 2007-03)
      Every distribution system has losses that will reduce the performance of the system. Thus the distribution system can not distribute maximum power for consumer. However, distribution system engineers have preferred to ...
    • Energy management for lighting system 

      Yuzairi Zainon (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      This final year project present the analysis and result of energy management for lighting system in Kompleks Pusat Pengajian at Universiti Malaysia Perlis, that produce detailed by analysis how to saving the cost of ...
    • Effect of harmonics In laboratory equipments 

      Mohd Hanif Abd Hadi (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-03)
      This report, entitled “Effect of Harmonics in Laboratory Equipments” summarizes apart of final year project for the Electrical System engineering courses done in University Malaysia Perlis. This project is about learning ...
    • AC motor braking with dynamic 

      Dilla, Abd. Majid (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-04)
      This AC motor braking with dynamic is about the motor to stop or more known with brake. Usually inside motor industry, need motor stop or brake instantly. To generate this system, has been divided into three stages. First ...
    • Feedback control system : magnetic levitation 

      Mohamad Nawal Sahrani (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-04)
      This report, entitled “Feedback Control System: Magnetic Levitation System” summarizes the entire final year project for the Electrical System engineering courses done in Universiti Malaysia Perlis (UniMAP). This project ...
    • The influence of unsymmetrical AC power input to the core loss of a single phase transformer 

      Nur Azidawati Abd Razak (School of Electrical Systems Engineering, 2007-04)
      This final year project describes about the influence of unsymmetrical AC power input to the core loss of a single phase transformer. The unsymmetrical ac voltage is generated using unidirectional (half wave) ac voltage ...
    • Lighting control system using microcontroller 

      Lim Yee Hwa (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-04)
      Lighting control system is a system that reduces energy consumption by optimizing the daylight. Automatic shading, dimming control system and pre-programmed mode have been developed in order to reduce the energy consumption. ...
    • Magnetic levitation (Design PID controller) 

      Noriah Jaafar (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-04)
      Magnetic levitation systems, based on electromagnetism, are characterized by open loop instability and non linear dynamics are described by highly nonlinear equations that suggest the need of stabilizing controllers which ...
    • Optimal sizing of compensating capacitor in distribution system using Artificial Immune System (AIS) 

      Mohd Izhar Mohd Said (School of Electrical Systems Engineering, 2007-04)
      Compensating capacitor is one of the method that used by engineers to reduce power losses. This project has been done to make the finding of the suitable value for capacitor in distribution system easier. Technique that ...
    • Magnetic levitation system 

      Nurul Baith Samsudin (Universiti Malaysia PerlisSchool of Electrical Systems Engineering, 2007-05)
      Magnetic Levitation (Maglev) Systems have gained considerable interest due to their great practical importance in many engineering fields. Maglev technology has been receiving increasing attention because it helps eliminate ...
    • A development of MOSFET and IGBT thermal management in DC to DC converter 

      Norainon Mohamed (School of Electrical Systems EngineeringUniversiti Malaysia Perlis(UniMAP), 2007-05)
      This project was to produce a template of MOSFET and IGBT thermal management in DC to DC converter. Thermal management included by supplying variable input voltages to the DC to DC converter, and gets the variables of ...