Browsing Zaliman Sauli, Lt. Kol. Professor Dr. by Issue Date

Now showing items 41-55 of 55

    • Fibrous material density difference analysis using light reflectance 

      Ong, Tee Say; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      The objective of this work is designed and fabricated a lab module tester to differentiate the different type of printing paper quality which available commercially was done. Laser light source was used to differentiate ...

    • Velocity profile investigation of FFS microchannel at Re 100 

      Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Taniselass, Steven; Nor Shakirina, Nadzri; Hsio Mei, Tan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014)
      Recently, microfluidics system has been widely employed in various areas for instance biomedical,pharmaceuticals and cell biological researchdue to its advantages. The flow behavior in microchannels with different ...

    • 3D shape measurement and reconstruction using fringe projection 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Nor Shakirina, Nadzri; Veriven, Christopher John (Trans Tech Publications, 2014)
      Digital fringe projection technique using phase shifting method has been studied extensively for generatingthree dimensional (3D) surface information. The aim of this paper is to develop a simple automated optical inspection ...

    • Height measurement based on fringe projection 

      Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Nor Shakirina, Nadzri; Veriven, Christopher John (Trans Tech Publications, 2014)
      A three-dimensional surface measurement using fringe projection technique has received attention among the researches for the last few decades.However choosing the best method is the challenge because one needs to consider ...

    • Surface roughness and wettability correlation on etched platinum using reactive ion ecthing 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow; Goh, Siew Chui; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014-01)
      As the world of semiconductor is moving towards smaller and high-end applications, the quality of the bonding adhesion for wire bonding is very critical. Although aluminium has been the metallization of choice in integrated ...

    • Main effects study on plasma etched aluminium metallization 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Aaron, Koay Terr Yeow (Trans Tech Publications, 2014-01)
      Main effects contributing to the quality of surface roughness on an etched aluminium metallization wafer using Reactive Ion Etching (RIE) was studied. A total of three controllable process variables, with eight sets of ...

    • WSS investigation in microfluidic FFS channel at Re 500 

      Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Taniselass, Steven; Nor Shakirina, Nadzri; Hsio Mei, Tan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014-01)
      Wall shear stress (WSS) is one of the important variables in microfluidic devices. In this paper WSS distribution for a microfluidic device in Forward Facing Step (FFS) configuration has been investigated using Reynolds ...

    • Heat sink fin number variation analysis on single chip high power LED 

      Zaliman, Sauli, Dr.; Vairavan, Rajendaran; Retnasamy, Vithyacharan (Trans Tech Publications, 2014-01)
      Thermal management of high power LED is crucial the reliability and performance of the LED affected by the heat produced during photon emission. Heat sinks are utilized to dissipate the heat and to lower the operating ...

    • BaₓSr₁-ₓ TiO₃ different thickness analysis using sol gel approach 

      Nurhafizah, Ramli; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; They, Yee Chin; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah (Trans Tech Publications, 2014-01)
      Barium Strontium Titanate (BST) a common topic in the microelectronic field for many devices which is mainly on dynamic random access memories (DRAM). There are many methods of preparing BaₓSr₁-ₓTiO3; barium strontium ...

    • Natural heat convection analysis on cylindrical Al slug of LED 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan; Khairul Anwar, Mohamad Khazali; Nooraihan, Abdullah; Nazuhusna, Khalid (Trans Tech Publications, 2014-01)
      This paper presents the characterization of a single chip high power LED package through simulation. Ansys version 11 was used for the simulation. The characterization of the LED package with aluminum cylindrical heat slug ...

    • CuDia slug size variation analysis on heat dissipation of high power LED 

      Vairavan, Rajendaran; Retnasamy, Vithyacharan; Zaliman, Sauli, Dr. (Trans Tech Publications, 2014-01)
      The current advancement of LED has prompt thermal challenges from the packaging point of view. The reliability of the LED is significantly influenced by each of its packaging component. This paper presents the investigation ...

    • Operating temperature analysis of LED with cylindrical Cu slug 

      Vairavan, Rajendaran; Zaliman, Sauli, Dr.; Retnasamy, Vithyacharan (Trans Tech Publications, 2014-01)
      High power light emitting diodes is the new era of lighting due to momentous supremacy in terms of lighting efficacy over traditional lighting systems. The reliability of LED is dependent on its junction temperature. This ...

    • Effects of heat slug shapes on the heat dissipation of high power LED 

      Zaliman, Sauli, Dr.; Vairavan, Rajendaran;; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)
      High power light emitting diodes are currently challenged by thermal issue of high heat generation which limits the reliability and efficiency. Each component in the LED package has a significant role in heat dissipation. ...

    • LED heat dissipation analysis using composite based cylindrical slug 

      Zaliman, Sauli, Dr.; Vairavan, Rajendaran; Retnasamy, Vithyacharan (Trans Tech Publications Inc., 2014-02)
      The optical efficacy and reliability of light emitting diode is extensively influenced by the operating junction temperature of the LED. Therefore, the evaluation of junction temperature is significant. This paper reports ...

    • Wettability and surface roughness study on RIE treated aluminium deposited surface 

      Retnasamy, Vithyacharan; Zaliman, Sauli, Dr.; Uda, Hashim, Prof. Dr.; Palianysamy, Moganraj; Aaron, Koay Terr Yeow; Ramzan, Mat Ayub (Trans Tech Publications, 2014-04)
      Design of Experiment (DOE) is a technique for optimizing process which has controllable inputs and measurable outputs. As a method of DOE, 24 Full Factorial design is used to study the effect of Reactive Ion Etch towards ...