Search
Now showing items 1-10 of 24
Self-compacting high density tungsten-bronze composites
(Elsevier, 2013-07)
Green compacts of W–bronze were encapsulated in shells of bronze powder, placed in a ceramic mold and sintered in alumina tube furnace at 1150 °C. Throughout the sintering cooling stage the differential coefficient of ...
Comparison of liquid phase sintering and Cu-melt infiltration methods to consolidate 80W-Cu composite using nickel as sintering activator
(Trans Tech Publications, 2013)
In this article, studies were conducted to evaluate the densification of W- Cu sintered compacts produced using two methods; liquid phase sintering (LPS) and combination of liquid phase sintering and liquid infiltration ...
The role of the activator rich-W interboundary layer on liquid phase sintering of W-pre-alloy bronze composites of Fe and Co additions
(Elsevier B.V., 2012-11)
In this study, the effects of 1-3 wt.% Fe and Co additions on the sintering of W 40-80wt.%-pre-alloy bronze Sn 10 wt.%-Cu compacts were examined. The isothermal part of the sintering process was conducted at temperatures ...
A brief review of layered rock salt cathode materials for lithium ion batteries
(Trans Tech Publications, 2013)
Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ...
The factors affecting the swelling of W–bronze composite system at different sintering conditions
(Scientific.Net, 2012-12)
During sintering of Wbronze metal matrix composites, the difference in the interdiffusuion path, sintering atmosphere and alloying element might be the source of the swelling phenomenon. In this study, the factors lead to ...
Electrochemical corrosion behaviour of Mg-(Ca,Mn) sacrificial anodes
(Trans Tech Publications, 2013)
The aim of the study is to identify the effect of Ca in Mg-Mn alloy on electrochemical corrosion behavior for the development of high performance sacrificial anode. Mg alloys were fabricated by casting technique under an ...
Preparation and characterization of Co-HA powder using modified electroless method
(Trans Tech Publications, 2014)
C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ...
Sintering behavior and microstructure evolution of mechanically alloyed W–bronze composite powders by two-step ball milling process
(Elsevier, 2013-01)
The miscibility of W in Sn and Cu is extremely poor. Sintering of W–bronze composites to their full density is proved to be difficult. To tackle this problem, the ball milling process of the W–bronze powder mixture proposed ...
A study on relationship between porosity and compressive strength for geopolymer paste
(Trans Tech Publications, 2013-12)
This paper presents a study on the relationship between porosity and compressive strength for geopolymer paste. In this research, geopolymer paste was made from fly ash class F based geopolymer mixed with alkaline activator; ...
Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders
(Trans Tech Publications, 2014)
HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ...