Browsing Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir. by Author "Norainiza, Saud"
Now showing items 1-7 of 7
-
A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods
Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ... -
The effect of thermal annealing on the microstructure and mechanical properties of Sn-0.7Cu-xZn solder joint
Mohd Izrul Izwan, Ramli; Mohd Arif Anuar, Mohd Salleh; Rita, Mohd Said; Mohd Mustafa Al Bakri, Abdullah; Dewi Suriyani, Che Halin; Norainiza, Saud; Nabiałek, Marcin (MDPI AG, 2021-02)The microstructural properties of a Pb-free solder joint significantly affect its mechanical behaviours. This paper details a systematic study of the effect of the annealing process on the microstructure and shear strength ... -
Influence of Activated Carbon Particles on Intermetallic Compound Growth Mechanism in Sn-Cu-Ni Composite Solder
Mohd Izrul Izwan, Ramli; Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Rita, Mohd Said; Norainiza, Saud (EDP Sciences, 2016-10)The influence of Activated Carbon (AC) particles on mechanical properties of Sn-Cu-Ni-xAC solder joint was investigated. Five different Activated Carbon (AC) percentage addition (0 wt. %, 0.25 wt. %, 0.5 wt. %, 0.75 wt. ... -
An investigation of TiO2 addition on microstructure evolution of Sn-Cu-Ni solder paste composite
Norainiza, Saud; Rita, Mohd Said; Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Mohd Izrul Izwan, Ramli; Norhayanti, Mohd Nasir (EDP Sciences, 2016)In this research, varying fraction of titanium oxide (TiO2) reinforcement particles was successfully incorporated into Sn-Cu-Ni solder paste in an effort to study the influence of TiO2 addition on microstructure evolution ... -
Low and high temperature isothermal aging effect on morphology and diffusion kinetics of intermetallic compound (IMC) for Sn-Cu-Si ₃N₄ composite solder
Norainiza, Saud; Najib Saedi, Ibrahim; Mohd Arif Anuar, Mohd Salleh (Trans Tech Publications, 2014)The effect of excessive intermetallic growth to the reliability of solder joints become major problem in electronic devices industry. In this study, we used Sn-Cu-Si₃N₄ composite solder to observe the intermetallic compound ... -
Performance of Sn-3.0Ag-0.5Cu composite solder with kaolin geopolymer ceramic reinforcement on microstructure and mechanical properties under isothermal ageing
Nur Syahirah, Mohamad Zaimi; Mohd Arif Anuar, Mohd Salleh; Sandu, Andrei Victor; Mohd Mustafa Al Bakri, Abdullah; Norainiza, Saud; Shayfull Zamree, Abd Rahim; Vizureanu, Petrica; Rita, Mohd Said; Mohd Izrul, Izwan Ramli (MDPI AG, 2021-02)This paper elucidates the effect of isothermal ageing at temperature of 85 °C, 125 °C and 150 °C for 100, 500 and 1000 h on Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with the addition of 1 wt% kaolin geopolymer ceramic (KGC) ... -
Zn-Sn based high temperature solder - A short review
Sayyidah Amnah, Musa; Mohd Arif Anuar, Mohd Salleh; Norainiza, Saud (Trans Tech Publications, 2013)The developments of lead-free solders have become a major concern to the researchers in electronic industry to replace the lead-containing materials. The concern is not just for low temperature solders but also for high ...